PTZApp 2
1. Download and install PTZApp 2 to your computer from AVer Download Center.
(https://www.aver.com/download-center).
2. Make sure your camera and computer are connected to the same network.
3. Double-click the PTZApp 2 icon
Recommended browser: Chrome 76 and above, Firefox 69 and above.
4. Connect your camera to your computer using the included USB cable. When PTZApp 2 detects a
USB-connected camera, a camera card will appear under the USB Devices page.
5. Click the pencil icon
DHCP.
6. Select DHCP and click Confirm.
7. Click the link icon
8. For first-time login, enter the default password aver4321. You'll be prompted to set up a new
account and password.
Use 6-10 characters, upper and lowercase letters, numbers and special characters (* ! % + = ,
- _ ^ / @ . ~).
If you forgot your password, use PTZApp 2 to reset the password to the default password
aver4321.
to open PTZApp 2 in your browser.
on the camera card to change the default static IP 192.168.1. 168 to
on the camera card to access the web interface.
25