Inp Dump Facility - HP 30020B Installation And Service Manual

INP Dump Facility
will assign the proper file/device.
The required command to identify the dump file is:
FILE INPDUMP = INPLOGnn
The command that invokes the Analyzer is:
RUN INPDPAN.PUB.SYS
Note that INPDPAN does not purge the dump file; it must be done
manually.
The following is a sample stream job:
!JOB INPDUMP,MANAGER/PSWD.INP
!FILE INPDUMP=INPLOGOl.PUB.SYS
!RUN INPDPAN.PUB.SYS
!EOJ
e-2