Table of Contents
Advertisement
Step No.
27
HALF SPEED?
YES or NO
28
SPEED CHANGEABLE?
YES or NO
Configuring MPE
·Prompt and Response
(Asked only
if
your
response
to
prompt 26 was YES)
(response overridden if modems pro-
viding internal clocking are used)
29
TRANSMISSION SPEED?
(in characters per second)
250, 300, 600, 1200, 2400, 3600, 4800, or 7000
{DSN/DS)
250, 300, 600, or 1200
(DSN/RJE and DSN/MRJE)
NOTE
The transmission speed you specify is ignored
for
mo-
dems that
provide
internal
clocking
signals.
This
feature
allows
modems
of different speeds to be used
without reconfiguring the operating
system.
It
also
allows
the
console
operator
to
change the speed of
hardwired lines through the use of
the
;SPEED=
para-
meter when the line is opened.
30
TRANSMISSION MODE? 0 or 1
0 = Full Duplex
1 = Half Duplex
NOTE
Subtype 3 requires full duplex, except when the INP
is
hardwired to an SSLC.
For hardwired INP-toSSLC, always
configure both devices as Subtype
1
and
Transmission
Mode 1.
31
PREFERRED BUFFER SIZE? {in woras}
0-1024
(DSN/DS -- 1024 recommended)
32
DRIVER CHANGEABLE? NO
33
DRIVER OPTIONS? 0
(DSN/MTS- 500 recommended)
(DSN/RJE,DSN/IMF and DSN/MRJE
overrides this option)
A-5
Advertisement
Table of Contents
Troubleshooting
