Version II
■
Vertical unit with casing,with air intake from below and air outlet on
top, for installation on a wall or on feet on the floor.
a
a
Version III
■
Vertical unit for building-in,with air intake from below and air delivery
at the top,for installation on a wall.
a
Climate 5000 VRF
a
Fig. 4-3
a
Fig. 4-4
a
b
Fig. 4-5
INDOOR UNIT INSTALLATION | 5
Table 4-1
Version
Version I
a (mm)
≥150
_________
b (mm)
After the selection of installation location, position the refrigerant
■
pipes, drain pipes,indoor & outdoor cables to the connection places
before installing the unit.
4.2 Version I Installation
For installation,follow the instructions set out below:
Remove the external casing,unscrewing the screws which secure it to
■
the structure,as following indicated.
1) Mark out the fixing points on the wall, either by marking through
■
the drillings in the unit itself,or by referring to the measurements
given in Table 4-2.
2) Secure the unit by screwing the four fixing screws into suitable
masonry plugs.
Version II
Version III
≥150
≥200
_________
≥80
Fig. 4-6
Fig. 4-7
Fig. 4-8
6720866023 (2017/11)