Advertisement
5. Shroud
• Remove the fan. (Refer to section 4)
• Remove the 6 screws that fasten the shroud.
• Remove the shroud. (See Figure 7)
• Re-install the components by referring to the removal procedure, above.
6. Heating Elements
• Drain the water heater to a level just below the element to be replaced.
• Remove the front décor. (There is 4 hooks.)
• Remove 2 screws that fasten the element cover.
• Remove the element cover. (See Figure 8)
• Mark, then disconnect the wires from the element by removing the 2 screws.
• Using socket wrench, remove the element.
• Re-install the components by referring to the removal procedure, above.
7. ECO
• Drain the water heater to a level just below the upper element
• Remove the front decor. (There is 4 hooks.)
• Remove 2 screws that fasten the upper element cover. (See Figure 8)
• Remove the upper element cover.
• Mark, then disconnect the wires from the ECO by removing the 4 screws.
• Remove 2 nuts that fasten the ECO.
• Remove the ECO.
• Re-install the components by referring to the removal procedure, above.
Copyright © 2023 LG Electronics Inc. All rights reserved.
Only training and service purposes.
(Figure 7)
-12-
(Figure 8)
Advertisement
