FZ-1
Figure 22
CN5
Figure 23
• Mechanism Reassembly
Traverse Deck
Figure 25
2-9
(5) Disconnect the connector (CN 4) as
shown in Figure 22.
(6) Turn the CD-ROM Drive Unit upside
down and remove four screws <E> (2.6
x
8 mm) as shown in Figure 23.
(7) Disconnect two connectors (CN 5,
CN 7) as shown in Figure 23.
(8) Gradually raise the PCB and then
disconnect two connectors (CN 3,
CN 6) as shown in Figure 24.
(9) Remove the PCB.
(1) After removing the Tray, unhook two
Hooks securing the Traverse Deck as
shown in Figure 25.