Remove The Knob Bolts (@X2); Procedure; Remove The Screws (@X4) - Panasonic KX-G8300 Service Manual And Technical Manual

HOW TO REMOVE THE OPERATION
P.C.BOARD (PQUP822ZA) AND
KEY BUTTON
Ref. No. 9
1. Remove the screws (@x8).
2. Remove the screws (@~ 19 ).
Note: When assembling the key button, tighten the
screws in the order shown.
Ref. No. 10
HOW TO REMOVE THE ADJUSTMENT
P.C.BOARD
Procedure
134510
a7
Adjustment P.C. a
1. Remove the screws (@x2).
LO Gets Kielt)
MODEL KX-G8300DM
Note: Use non-magnetic screwdrivers when working inside
the transmitter unit to avoid damage to the
magnetron.
HOW TO REMOVE THE RADOME
Ref. No. 1 COVER
1. Remove the bolts (®x4).
2. Remove the bolts and washers (@x4).
HOW TO REMOVE THE SCANNER UNIT
1. Remove the screws (@x4).