Philips 32PF1700T/96 Service Manual page 9

use high-quality and HDMI-certified cable
for connection.
Connecting the stereo audio output
This display provides a set of stereo audio
output terminals (RCA type) for delivering
the audio signal to a sound system or
other audio devices. Connect the audio
input terminals of an amplifier or other
audio device to the AUDIO OUT L/R
terminals on the display using a suitable
audio cable.
This output is always available. Its level is
fixed and cannot be adjusted by the
Volume setting of the display.
Installing the tuner box
Before installing the tuner box, please pay
attention to the following to ensure the
safety of installation:
• Wear suitable protective insulation
gloves to prevent any possibilities of
injuries.
• Peel off the protective film on the tuner
box prior to installation.
• Be sure to turn the display power off and
disconnect the power cord from the power
outlet. Turn the power of the devices off
and remove all connected signal cables if
the display is connected to other devices.
• Make sure that there is sufficient space
around the display for performing the
installation. If not, it is suggested that you
move the display to a suitable place to
perform installation, and then move it back
to its original location when installation is
IMP1.0A LA 9