Philips 32PF1700T/96 Service Manual page 55

d
(4) If position is wrong, press "Auto Adjustment" function at factory OSD
to check this function
3. RGB ADC Calibration :
(1) Setup input timing 800x600 60Hz
& 16-Grays pattern to DSUB
connector.
(2) Setup "source" to "PC".
(3) Select 16:9 format
(4) Enter factory OSD
(5) Enter the "ADC CAL...." page and
run "Calibration" function
(6) Execute "Input 16 grays scale
pattern for PC" to start calibration.
4. YPbPr ADC Calibration :
(1) Using VG859 setup input
timing 480P & "pattern
101" to component
connector
IMP1.0A LA
(2) Select "TV source" to
"Component".
(3) Select 16:9 format
(4) Enter factory OSD.
(5) Enter the "ADC CAL...."
page and run "Calibration"
function.
(6) Execute "Input SMPTE 75
color bar for 480P" to start
calibration.
5. Spec and Table list
(1) Reference: The variance of
color coordinate via Red,
Green, Blue :
X
Red drive x
-
Green drive
Blue drive x
Red offset x
Green offset -
Blue offset x
(2) Table 1 : Color temperature
spec
Color temp item
55
Y
-
Y
Y
-
Y
Y
CVBS/COMPONENT