1
8. EACH SETTING AND ADJUSTMENT
8.1 NECESSARY ITEMS TO BE NOTED
After repairing, be sure to check the version of the firmware, and if it is not the latest one, update to the latest version.
A
Perform the each item when the following parts are replaced.
• MAIN Assy
• LCDB Assy (FLASH ROM: IC4602)
• PNLB Assy (PANEL CPU: IC8001)
B
• SRVB Assy (FLASH ROM: IC7004)
• TM Assy 09SD-S
• Tempo slider VR: VR8702 (SLDB Assy)
C
• Jog dial section component
• Touch panel
∗: For confirmation of the touch display operation, refer to "Confirmation of the Touch display operation" in "[1] Check mode of
the buttons and displays" of "6.1 SERVICE MODE."
D
8.2 FIRMWARE UPDATE / RECOVERY
For details on updating of firmware and recovery of the main unit, see "[9] Firmware update" in "6.1 SERVICE MODE."
E
F
66
1
2
• Input Drive LD life before the replacing with a manual.
(See "6.1 SERVICE MODE")
• Confirmation of the version of the firmware
• Updating to the latest version of the firmware
• Confirmation of the version of the firmware
• Updating to the latest version of the firmware
• Confirmation of the version of the firmware
• Updating to the latest version of the firmware
• Confirmation of the version of the firmware
• Updating to the latest version of the firmware
• Reset drive LD lighting time
(See "6.1 SERVICE MODE")
• TEMPO ZERO POINT ADJUSTMENT
(See "8.5 TEMPO ZERO POINT ADJUSTMENT")
• JOG DIAL ROTATION LOAD ADJUSTMENT
(See "8.4 JOG DIAL ROTATION LOAD ADJUSTMENT")
• Confirmation of the touch display operation ∗
CDJ-2000NXS2
2
3
3
4
4