Bosch Professional GFA 12-H Original Instructions Manual page 14

14 | English
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
After operating for extended periods of time, allow
u
the hammer attachment to cool down before touching
it. The hammer attachment may become hot when oper-
ated for extended periods of time.
Additional safety instructions and working
advice
If the application tool should become blocked, switch
u
the power tool off. Loosen the application tool.
Switching on when the drilling tool is blocked may
u
cause high torque reactions.
Avoid switching on the tool accidentally. Make sure
u
that the on/off switch is set to the off position before
inserting a battery. Accidents can occur as a result of
carrying the power tool with your finger on the on/off
switch or inserting the battery while the power tool is
switched on.
Read and strictly observe the safety instructions in
u
the operating instructions of the cordless drill/driver.
Always make sure that you maintain a safe distance.
u
When operating the power tool in high up areas, e.g.
on a ladder, ensure that no one is beneath you.
Never touch the application tool or parts of the power
u
tool near to the application tool after use; these may
be extremely hot. There is a risk of burns.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Technical Data
Hammer adapter with auxiliary handle
Article number
Cordless screwdriver
Article number
A)
No-load speed
A)
Impact rate
Rated voltage
Max. drilling diameter
– Concrete
– Masonry
Weight according to EPTA-Procedure 01:2014
1 609 92A 64N | (28.01.2022)
Intended use
The power tool (GSR 12V-15 FC/GSR 12V-35 FC with ham-
mer adapter GFA 12-H) is intended for hammer drilling in
concrete, brick and stone.
The hammer adapter GFA 12-H may only be used with the
GSR 12V-15 FC and GSR 12V-35 FC cordless drill/drivers.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Holder
(2) Torque presetting ring
(3) Gear selector switch
(4) Battery release button
(5) Battery
(6) Rotational direction switch
(7) On/off switch
(8) Battery charge indicator
(9) Worklight
(10) Locking ring
(11) Belt clip
(12) Hammer adapter
(13) Auxiliary handle with depth stop
(14) Handle (insulated gripping surface)
(15) Snap-in pin
Items included
Hammer adapter (12), auxiliary handle with depth stop (13)
and belt clip (11).
Application tools and other accessories shown or described
are not part of the standard delivery scope.
You can find the complete selection of accessories in our ac-
cessories range.
1 600 A01 L1N
GSR 12V-15 FC
3 601 JF6 0..
-1
min
-1
min
V=
mm
mm
B)
kg
GFA 12-H
1 600 A01 L1N
GSR 12V-35 FC
3 601 JH3 0..
0–1 300
2 600
12
10
16
2.3–2.5
Bosch Power Tools
GFA 12-H
0–1 700
3 700
12
10
16
2.2–2.4