Page 1
Operating the Product ........Maintenance Maintenance and Cleaning ......Troubleshooting ..........For household use only 3CM ONLY Thank you for purchasing a Hitachi front loading washing machine. ■ Please read this Instruction Manual carefully for proper operation of the machine. ■...
Control Panel........20 Table of Contents Symbols on the Display ....21 1 Safety Instructions......Programme and Consumption Intended Use........Table ..........Safety of Children, Vulnerable Programme Selection....23 Persons and Pets ......Programmes ........23 Electrical Safety......Temperature Selection ....26 Handling Safety ......
Page 3
Please read this user manual first! Dear Customer, Thank you for choosing Hitachi product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
1 Safety Instructions This section includes the safety • This appliance is intended to instructions necessary to pre- be used in household and sim- vent the risk of personal injury or ilar applications. For example; material damage. – Personnel kitchens of stores, Our company shall not be held offices and other work envir- responsible for damages that...
• Electrical products are danger- • If the power cable is damaged, ous for children and pets. Chil- it must be replaced by the au- dren or pets should not play thorised service in order to with, climb on top or inside the avoid possible risks.
• The product is heavy, do not • Check for any damage on the move alone. Do not hold ex- product before installing it. Do truding parts such as the laun- not have the product installed dry loading door to lift and if it is damaged.
• Do not plug the product to • If a drier is to be placed on the loose, broken, dirty, greasy product, fix with a suitable con- sockets or sockets that has nection apparatus obtained come out their seats or sock- from the authorised service.
• Unplug the product and turn • Do not place your hand or a off the tap if you will not be us- metal object under the wash- ing the product for long peri- ing machine. ods. • If washing laundry at high tem- •...
• Do not use sharp or abrasive • There may be detergent tools to clean the product. Do residues in the detergent not use household cleaners, drawer when you open it for soap, detergent, gas, gasoline, cleaning. thinner, alcohol, varnish, etc. •...
4 Installation 4.1 Appropriate Installation Loca- Please read the “Safety Instruc- tion tions” section first! • Place the product on a hard and level Your washing machine automatic- floor. Do not place it onto a carpet with ally detects the amount of laundry high pile or other similar surfaces.
Cover A 3. Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. NOTICE Remove the transportation safety Tilt the machine back slightly. Rest the tabs bolts before operating the product. of Cover A against the lower panel. Com- Otherwise, the product will get plete the assembly by rotating the cover.
the nut carefully again. In order to pre- of the hose into the waste water or do vent the water leaks and resultant dam- not insert it into the drain for more than ages, keep the taps closed when you do 15 cm.
that shall be incurred due to using the Damaged power cables should be product without grounding according to replaced by the authorised service local regulations. in order to prevent possible danger. • Connection must comply with national 4.8 Start Up regulations.
• Do not wash colours and whites together. running. The door lock will open once New, dark coloured cottons release a lot the programme is completed. Then you of dye. Wash them separately. can open the loading door. If the door •...
• Wash woollens at suggested programme Detergent, Softener and Other Cleaning with special detergent made specifically Agents for woollens. • Please review the programme descrip- tions part for suggested programme for different textiles. • All recommendations about detergents are valid for selectable temperature range of programmes.
WARNING When the detergent drawer is filled with detergent and/or softener; do not pull or move the equipment, and do not tilt it on either side or back. Before conducting these opera- tions, the detergent drawer must al- ways be removed from the ma- chine.
Machine measures the load and determ- will turn off. If the softener symbol is not lit, it means that softener will not be used in the ines the right amount of detergent depend- rinsing step. ing on the load amount and the selections made previously.
Powder and liquid deter- It may be necessary to gents recommended for pre-treat the stains or per- colours can be used at form prewash. dosages recommended Prefer liquid deter- Liquid detergents Powder and liquid deter- for heavily soiled gents produced suitable for colours gents recommended for clothes.
6.4 Programme Selection Please read Installation section of the manual before first use. 1. Determine the programme suitable for The auxiliary functions in the table the type, quantity and soiling level of the may vary according to the model of laundry in accordance with "Programme your machine.
sured with intense washing movements. If machine. Load the duvet into the machine the quick wash function is not selected, ef- while paying attention that it will not con- fective washing and rinsing performance is tact the door gasket or the glass. ensured for your heavily soiled laundry.
• Apply the pre-treatment chemical on your This is not a washing programme. garments directly or add it together with This is a maintenance programme. the detergent in the powder detergent Do not turn this programme on compartment. Thus, you can obtain the when there is something inside the same performance as you obtain with machine.
way. Use this programme only for durable can use the HomeWhiz application to se- colourfast cotton laundry. Do not wash del- lect a programme from the predetermined icate and pigmenting clothes and laundry in programme set, and then change and use this programme.
Press the Temperature Adjustment button 1. Adjust the Spin Speed. to change the temperature. Temperature 2. Press Start / Pause. The programme will decreases gradually. resume. Machine drains the water and spins the laundry. No change can be made in pro- If you want to drain the water at the end of grammes where temperature ad- the programme without spinning, use No...
Also the frames of the auxiliary functions panel will be lit. You can use the Intensive selected for the current programme after selection to achieve a better washing per- the washing has started remain illumin- formance when washing heavily soiled ated.
cancelled or the step is complete. If the • Auto Dosing function is not cancelled, it will be active in You can change your dosage and detergent the subsequent washing cycles as well. preferences with this auxiliary function but- ton. For detailed information, see “Dosage •...
formed based on the latest settings you connection icon blinks when the product is have selected until you select a new set- connecting the internet. If connection is ting. successful, icon will remain on. To deactivate wireless connection: • Child Lock Press and hold Remote Control button for 3 Use Child Lock function to prevent children seconds.
Additional laundry can be added into the machine during the End Time countdown. At the end of the countdown, End Time indicator turns off, washing cycle starts and the time of the selected pro- In order for the End Time function to be ac- gramme appears on the display.
If the Remote Control Function is selected, the door will be locked. In order to open the door you must de- activate Remote Start Function by either pressing the Remote Start button or changing the programme position. Opening the loading door in case of power failure: 6.12 Changing the Selections After In case of power failure, you can...
If you turn the programme selection button when the Child Lock is en- abled, the programme will not be cancelled. You should cancel the Child Lock first. If you want to open the loading Changing the programme selection after door after you have cancelled the programme has started: programme but it is not possible to Programme cannot be changed when a...
You can touch the “Appliances” tab in the 1. If you are adding a device for the first HomeWhiz application to view appliances time, touch “Appliances” tab on the paired with your account. Following the in- HomeWhiz Application. Select “ADD AP- stallation of the application, HomeWhiz PLIANCE”...
Your washing machine will auto- matically turn off if you cannot real- ize the setup successfully within 5 minutes. In this case, you have to start the setup process all over again. If the problem continues, please contact the Authorised Ser- vice.
6.15.3 Deleting the HomeWhiz Ac- You can check the bluetooth symbol on the display to track your connection status. If count Match the symbol is continuously on, you have Follow the following steps in order to delete bluetooth connection. If the symbol is a washing machine previously matched flashing, the product is trying to connect.
You can follow whether the Remote Control • When your washing machine undergoes function is On or Off through the function a power interruption. indicator on the button. • When programme knob is turned and a different programme selected or appli- If the Remote Control function is Off, all the ance is turned off.
• If it is not going to be used for a long 5. The detergent will start to pour into the time (e.g. at the time of moving to the container. summer house and at the time of return, 6. The same is carried out for the softener for 3 months or more), the liquid washing compartment.
1. Close the taps. After every washing make sure that no for- eign substance is left in the product. 2. Remove the nuts of the water intake If the holes on the door gasket shown in the hoses to access the filters on the water figure is blocked, open the holes using a intake valves and clean them with an ap- toothpick.
3. Follow the below procedures in order to NOTICE: drain water. Foreign substances left in the pump filter may damage your If the product does not have an emer- product or may cause noise prob- gency water draining hose, in order to lem.
Page 41
lection button or pressing and holding • Pump filter is clogged. >>> Clean the the On/Off button for 3 seconds to can- pump filter. cel the program. Previous programme Product stopped shortly after the pro- will be cancelled. See Cancelling the Pro- gramme started.
Page 42
• Input temperature of water is low. >>> Product does not switch to spinning Required time to heat up the water ex- step. (*) tends in cold seasons. Also, washing • There is unbalanced load in the product. time can be lengthened to avoid poor >>>...
Page 43
• Excessive laundry is loaded in. >>> Do dry. Keep detergents closed in an envir- not load the product in excess. Load with onment free of humidity and do not ex- amounts recommended in the "Pro- pose them to excessive temperatures. gramme and consumption table".
Page 44
• Softener dosage setting may be in low • Detergent was put in the wrong compart- level. >>> Increase the softener dosage ment. >>> Make sure you place the deter- amount by one level. See "Automatic gent in the appropriate compartment. Dosage Setting".