HP 8082A Operating And Service Manual page 54

ADJUSTMENTS
Table 5-l 9. Delay and Width (Verniers CW)
1
1 REPETITION RATE lOM-1
2 V E R N I E R
4 DELAY
5 VERNiER
8 WIDTH
9 V E R N I E R
A4 R38 affects the delay in all ranges (except 2n-5n1
2
when the vernier is CW. Range of values for A4 R38 is 100 kf2
upwards, increase in resistance increeses delay. This adjustment
is done at the factory.
Max width in all ranges (except
5
when the vernier is CWj by increasing A4 R88. Range of
values is 100 kR upwards. This adjustment is done at the factory.
M
c w
as required, but not 2n-5n
CW
as required, but not 2n-5n
C W