•
Definitions of button functions
Buttons (main unit)
Start button
Start button
Recharging button
Recharging button
Start button
+
Recharging button
Function description
Suction power gear setting (only supporting operations in the App)
•
Users may set the working suction power gears of the robot in the App. The gear settings are as follows:
̷
Quiet gear
Standard gear
̷
̷
Medium gear
̷
Powerful gear
Mopping power gear setting (only supporting operations in the App)
•
By default, the robot starts mopping with a low-gear water level. Users may set the water level in the App.
•
Automatic mop washing
Every time before mopping, the robot will wash the mop first. By default, the robot will automatically
return to the docking station to wash the mop after each cleaning of 10 m² area. After finishing the
mopping task, the robot will automatically return to the docking station to wash and air-dry the mop, and
recharge.
Note: Do not open the water tank cover during mop washing, otherwise the service of the robot may be
affected.
•
Mop air-drying
Upon completion of the cleaning task, the robot will return to the docking station to clean and air-dry
the mop, which will last for 8 h. The effect of air-drying is subject to the humidity and temperature of the
home environment.
18
English
Operation
Short press once
Press and hold for 3 s
Short press
Press and hold for 3 s
Press and hold the two buttons at the
same time for 3 s
Press and hold the two buttons at the
same time for 15 s
Function
Start/pause cleaning
Startup/shutdown
Enable recharging
Child lock
Long press it to disenable child lock
Network pairing mode
Restore factory settings