(1) SUB-WOOFER output level contro!
[2] REAR MID output level contro!
(3) REAR HIGH output level contro!
(4) FRONT MID output level contro!
(5) FRONT HIGH output level contro!
[6) SUB-WOOFER crossover point selector
[7] REAR MID crossover point selector
[§) REAR HIGH crossover point selector
[5] FRONT MID crossover point selector
(18) FRONT HIGH crossover point selector
(i) SUB-WOOFER phase inversion switch
(i]] REAR HIGH phase inversion switch
FRONT HIGH phase inversion switch
These switches invert an phase between
the speakers. Use them when you feel a
bad sound continuity between the mid and
high ranges.
(i) SUB-WOOFER STEREO/MONO selector
Set the selector to MONO to make SUB-
WOOFER output monaural. When you use
the SUB-WOOFER output as monaural, do
not set the SUB-WOOFER crossover point
selector to 180 Hz. The balance of sound
reproduction may be affected if you do so.