Table of Contents
Advertisement
@ POWER key
-B2
Use to turn the receiver on and off.
Use in combination with the Input selector
(AUDIO, VIDEO, or TV} keys and SHIFT key
to turn various components on and off.
@ MACRO key
~ [34]
Ueo in combination with the ALIDIO,
VIDEO, or TV keys to execute a series of
commands automatically (MACRO PLAY}
© VIDEO selector key
-Ba
Selects the video inputs (VIDEO 1, VIDEO
2, VIDEO 3, AV AUX) and sets the remote
to operate the component registered at
the respective input.
@ Multi control keys
~(29)
Use To operate (ne selected coniportentt,
@ REC key
-(4g)
Use to operate the selected component.
@ TUNING/SKIP key
~a) ~ (43)
Use during the actup procedure te opocify
various settings. Use to operate the tuner
or selected component.
@ SUBWOOFER key
~ (23)
Use in combination with the VOLUME +/-
keys to adjust the volume of the subwoofer.
© FUNCTION SHIFT key
:
Use in combination with the numeric keys
Wy exewule alternate curmarids.
© Numeric keys
~g)
Provide functions identical to those of the
original remote supplied with the compo-
nent youl are cantrolling
To access the functions printed above the
keys, Press within 3 seconds of pressing
the FUNCTION SHIFT key. Function avail-
ability varies for each component.
@ SHIFT key
13h)
Use in combination with the AUDIO and
VIDEO keys to change the remote contro!
mode without changing the input selector
oF in combination with tho POWER key to
turn on and off components programmed
into the remote:
@ TV selector key
-3Q
Sets the remote to operate a TV or cable
box (TV 1, TV 2, CABLE). This key does not
change the input selector on the receiver.
1070VR/1060VR [En/K)
@ AUDIO selector key
2D)
Selects the audio inputs (CD, TAPE/MD.
TUNERA, PIIONO) and sets the remote to
operate the respective KENWOOD audio
component.
Hf you connect
audio components
from
KENWOOD and other makers to the TAPE/
MD or CD jacks, you can set the remote to
operate these components by registering
the appropriate setup code at the respec-
tive input.
@ GUIDE key
-2g
Use to activate the OSD menu functions of
registered components.
@ VOLUME key
+78)
Use to adjust the receiver volume
@ MUTE key
~ (9)
Use to temporarily mute the sound.
@ SOUND key
-Giz
Use to adiust the bass. treble, and input
level.
@ LISTEN MODE key
(22)
Use to select the desired surround mode.
@ SETUP key
-—4)
Use to adjust the surround setup
Advertisement
Table of Contents
