Kenwood 1070VR Instruction Manual page 25

41070VR/1060VR (En/K)
Renee) Keys or controls used in this operation.
Tuning radio stations by frequency (DIRECT tunin
Set the input fo tuner.
INPUT SELECTOR
y
BAND oy TUNING A
3 | Enter the frequency.
@ Press the DIRECT key.
DIRECT
eC
© Enter the frequency.
Frequency display
cI
rm
Each press switches the band as follows:
@FM oes
c DAM 'AM" or "FM" is displayed
Press the numeric keys in the following order:
* AM 10 kHz/FM 100kHz tuning space (U.S.A., Canada, etc.)
AM = 810 kHz, press....... 8),[1
AM 1260 kHz, press....... [a], 2),[6
FM 90 MHz, press....... [3),(Q),(0)
FM 102.5 MHz, press........ (1J,(O}, (2), {5}
* AM 9 kH2/FM 60 kHz tuning space (othor countrice)
AM 810 kHz, press....... (8) . (1) AG}
AM 1260 kHz, press....... (1],{2],[6), [0] :
FM sO Mv, prase. (a). fn). (A). (A)
FM 102.5 MHz, press........ 7). (0), (2). (5). (0)
* FM DE-EMPHASIS/CHANNEL SPACE switch. -
Frequency display
"TUNED" is displayed when a station is received
If you make a mistake entering the frequency, the frequency display
will blink for a few seconds. In this case, start again from step @.
—