Download Print this page

Kenwood SS-992 Instruction Manual page 5

Av surround processor
Hide thumbs Also See for SS-992:

Advertisement

12. Carts and stands
An appliance and cart com-
bination should be moved with care. Quick stops,
excessive force, and uneven
surfaces may cause
the appliance and cart combination to overturn.
13. Nonuse periods
The power cord of the unit
should be unplugged from the outlet when left un-
used for a long period of time.
14. Abnormal smell
If an abnormal smell or smoke
is detected, immediately turn the power OFF and pull
out the power cord. Contact your dealer or nearest
service center.
POWER
OFF!
15. Damage requiring service
The unit should be
serviced by qualified service personnel when:
A.
The power-supply
cord or the plug has been
damaged; or
B.
Objects have fallen, or liquid has been spilled into
the unit; or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or
exhibits
a marked change in performance;
or
E. The unit has been dropped, or the enclosure
damaged.
16. Servicing
The user should not attempt to ser-
vice the unit beyond that described in the operating
instructions. All other servicing should be referred
to qualified service personnel.
17. Outdoor antenna grounding
[fan outside an-
tenna is connected to the receiver, be sure the an-
tenna system is grounded so as to provide some
protection against voltage surges and built up stat-
ic charges. Section 810 of the National Electrical
Code, ANSI/NFPA
70, provides information with
respect to proper grounding of the mast and sup-
porting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding con-
Notes:
operation.
EXAMPLE OF ANTENNA GROUNDING
AS PER
NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
(NEC SECTION 810-21)
GROUND CLAMPS
wat
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
NEC — NATIONAL ELECTRICAL CODE
(NEC ART 250, PART H)
1. Item 3is not required except for grounded or polarized equipment.
2. Item 17 and 18 are not required except for units provided with antenna terminals.
3. item 17 complies with UL in the U.S.A.
.
SS - 992 (En) 5

Advertisement

loading