Table of Contents
Advertisement
Product Overview
3
2
1
1. Parking brake lever
2. Fuel cap (both sides)
3. Roll bar
1. Ignition switch
2. Engine coolant
temperature warning
light
3. Glow plug light
4. Power take off (PTO)
Switch
Controls
Become familiar with all the controls before you start the
engine and operate the machine
Motion Control Levers
The motion control levers control the forward and rearward
motions as well as the turning of the machine. Refer to
Driving the Machine (page
4
5
6
4
G020877
Figure 5
4. Motion control lever
5. Seat
6. Seat belt
Figure 6
5. Oil pressure warning light
6. Charge indicator light
7. Throttle lever
8. Hour meter
(Figure 5
and
Figure
24).
Parking Brake Lever
Whenever the engine is shut off, engage the parking brake to
prevent accidental movement of the machine. To engage the
parking brake, pull the parking brake lever rearward and up
(Figure
7). To release the parking brake, push the parking
brake lever forward and down.
1. Parking brake lever
CAUTION
Do not park the traction unit on a slope.
Ignition Switch
The ignition switch has 3 positions: Off, On/Preheat, and
Start.
Throttle Lever
The throttle lever controls the speed of the engine. Moving
the throttle lever forward toward the Fast position increases
the engine speed. Moving it rearward toward the Slow
position decreases the engine speed. The throttle controls the
speed of the blades and, in conjunction with motion control
levers, controls ground speed of the machine. Always run the
machine with the throttle in the Fast position when cutting
grass.
Power Take Off (PTO) Switch
The power take-off (PTO) switch starts and stops the mower
blades.
6).
Hour Meter
The hour meter records the number of hours the engine
has operated. It operates when the key switch is in the Run
position. Use these times for scheduling regular maintenance.
18
G020866
Figure 7
Advertisement
Table of Contents
