Sony KD-55X95 G Series Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. LCD TV
  5. KD-55X95 G Series
  6. Service manual
Sony KD-55X95 G Series Service Manual

Sony KD-55X95 G Series Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
2019/01/15 23:07:08 (GMT+09:00)
SERVICE MANUAL (COMMON)
ORIGINAL MANUAL ISSUE DATE: 2019.01
(See next page (for revision )
Conditions of Use:
(1) Please use this information only for the purpose of performing repair, maintenance and/or configuration services of the Sony products
(hereinafter the "Repair services") under the service agreement entered into with the Sony group company (hereinafter the "Service
agreement"). Using this information for any purpose other than the purpose described foregoing is forbidden.
(2) Only the Authorized Servicer's officers, employees or subcontractors (including their officers and employees) whose duties justify a
need-to-know and who have agreed to hold confidential this information (collectively hereinafter the "Permitted users") are permitted to
access and use this information. To disclose or disseminate to any person other than the Permitted users is forbidden.
(3) Destroy or erase any and all portion of this information promptly in an irrecoverable and secure fashion after achieving the purpose
described in Section (1) above.
(4) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part without the prior
written permission of the author.
(Notwithstanding foregoing, it is permitted to copy and distribute this information to the Permitted users.)
(5) Please notify immediately any leakage, loss, theft, misappropriation, or other misuse of this information by e-mail to the following
address:
somk-gcs-tissnexim-adm@jp.sony.com
(6) In addition to the above, the terms and conditions of the Service agreement shall be applied to using this information.
Revision of Information:
This information may be changed or updated at any time without any prior notice. Please confirm that this information is up-to-date before
using it.
GN5UR CHASSIS
Segment : SB
9-888-762-01
LCD TV
Sony EMCS (M) Sdn. Bhd., SVPM
© 2019.01
SYS SET

Advertisement

Table of Contents
loading

Related Manuals for Sony KD-55X95 G Series

Summary of Contents for Sony KD-55X95 G Series

  • Page 1 Conditions of Use: (1) Please use this information only for the purpose of performing repair, maintenance and/or configuration services of the Sony products (hereinafter the “Repair services”) under the service agreement entered into with the Sony group company (hereinafter the “Service agreement”).
  • Page 2 2019/01/15 23:07:08 (GMT+09:00) REVISION HISTORY Version Date Subject 2019.01 1. 1 Issue SYS SET...
  • Page 3 2019/01/15 23:07:08 (GMT+09:00) MODEL LISTS THIS SERVICE MANUAL CONTAINS COMMON INFORMATION FOR BELOW REGIONS AND MODELS: REGION ASIA AMERICA EUROPE CHINA JAPAN MODEL KD-55X95*G KD-65X95*G KD-75X95*G KD-85X95*G KD-55XG95* KD-65XG95* KD-75XG95* KD-85XG95* KJ-55X95*G KJ-65X95*G KJ-75X95*G KJ-85X95*G XBR-55X95*G XBR-65X95*G XBR-75X95*G XBR-85X95*G SYS SET...

  • Page 4: Table Of Contents

    2019/01/15 23:07:08 (GMT+09:00) TABLE OF CONTENTS Section Title Page SAFETY NOTES SELF DIAGNOSTIC FUNCTION TROUBLE SHOOTING SERVICE ADJUSMENT DIAGRAMS PANEL HANDLING Please refer Service Manual – Unique for below information :  Disassembly and Removal Caution  Wire Dressing  Circuit Board Location ...

  • Page 5: Safety Notes

    7) Always clean the LCD panel with a soft cloth material. Sony. Circuit adjustments that are critical for safe operation are identified in this manual. Follow these procedures whenever critical components are 8) Use care when handling the wires or connectors of the inverter circuit.
  • Page 6 2019/01/15 23:07:08 (GMT+09:00) 10) During the repair, DO NOT leave the Power On or Burn-in period for *Do not recommend power-on in the conditions which laid face down the more than 1 hour while the TV is face down on a cloth. Refer Figure 1 . panel, in repair activity.
  • Page 7 2019/01/15 23:07:08 (GMT+09:00) To reduce the risk of image retention: Other feature •Fill the screen by changing [Wide mode] to eliminate the black bars. The screen brightness is automatically reduced when displaying still Select [Wide mode] other than [Normal]. images, clocks, bright colours or logos etc. •Turn off the OSD (On Screen Display) by pressing the DISPLAY button, and turn off the menus from connected equipment.
  • Page 8 2019/01/15 23:07:08 (GMT+09:00) ※Things to prepare in advance 1) Caution for Board handling(Stress) Be sure to observe the following contents. ESD wrist-strap ① Hold the board with both hands ESD cushion/sheet ② Do not hold/push Heat-Sink Please use a bag containing the board or a special seat ③...
  • Page 9 2019/01/15 23:07:08 (GMT+09:00) ④Regardless of Good board or Defective board, always put it ⑦Do not hold Heat-Sink when take out or install it.. on ESD cushion/sheet slowly. ⑤Do not stack up 2) Caution for Board handling(ESD) Be sure to observe the following contents. ①When take off Rear-Cover, ②Use ESD wrist-strap do not touch to board...
  • Page 10 2019/01/15 23:07:08 (GMT+09:00) ※Installation example of wrist-strap ③When holding board, do not hit/touch to Plastic part(s) Please connect the clip to the metal part of the chassis of the TV with the wristband grounded.Below is a grounding example of each model. ＜K*-55/65A9F＞ ④After take defective board out from TV, put it into ESD bag.
  • Page 11 2019/01/15 23:07:08 (GMT+09:00) 1-4. Caution About the Lithium Battery 1-6. Leakage Test 1)Danger of explosion if battery is incorrectly replaced. Replace only with (To protect electric shock when customer touch the terminal.) the same or equivalent type. Leakage current can be measured by V: Voltmeter or oscilloscope 2) Outer case broken battery should not contact to water.
  • Page 12 2019/01/15 23:07:08 (GMT+09:00) 1-7. How to Find a Good Earth Ground The servicing of these boards requires special precautions. It is 1)A cold-water pipe is a guaranteed earth ground; the cover-plate strongly recommended to use Lead Free Solder material in order to retaining screw on most AC outlet boxes is also at earth ground.

  • Page 13: Self Diagnostic Function

    2019/01/15 23:07:08 (GMT+09:00) SECTION 2 SELF DIAGNOSTIC FUNCTION The units in this manual contain a self-diagnostic function. If an error occurs, the Smart Core Red LED will automatically begin to flash. The number of times the LED flashes translates to a probable source of the problem. A definition of the Smart Core Red LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 14 2019/01/15 23:07:08 (GMT+09:00) Self Diag. Quick Reference (Not LED blinking [Record Only]) Self Diag. Quick Reference (Not LED blinking [Record Only]) Error Item SB/SBL Blue italic : detect at startup sequence only <G>: Power supply board, <B>: Main board, TU_DEMOD <B> Tuner board set detect signal monitoring <T>: T-con board, <LD>: LD board, <P>: Panel module,...
  • Page 15 2019/01/15 23:07:08 (GMT+09:00) Self Diagnosis Service Menu Entry (Self Diagnosis Display) Exit - Go to the standby by a remote. -If you want to finish service mode app, do AC OFF/ON →*Service mode app is disable perfectly - Push the buttons sequentially: <Display><5><Vol-><Power>...
  • Page 16 2019/01/15 23:07:08 (GMT+09:00) Self Diagnosis Display Format of error timestamps Error Item YYMMDDhhmmss (in UTC) Error count Example: 120823132523 -> Aug 23 2012 13:25:23 UTC SELF CHECK * Only when time is set, an error timestamp Back << is saved. 002 MAIN POWER 000000000000 000000000000 000000000000...
  • Page 17 2019/01/15 23:07:08 (GMT+09:00) Retry Limitation by Remote/Power Key Smart Core Red LED Error Name Retry Permission Times Note blinking Number of off/on action for MAIN_POWER count shutdown is recorded to STDWN_OFFON_CNT_MAIN_POWER STDWN_RTRY_LIMIT_MAINPO MAIN_POWER WR = 1 DC_ALERT (5V) STDWN_RTRY_LIMIT = 2 AUD_ERR STDWN_RTRY_LIMIT = 2 LD_ERR STDWN_RTRY_LIMIT = 2...

  • Page 18: Troubleshooting

    2019/01/15 23:07:08 (GMT+09:00) SECTION 3 TROUBLESHOOTING Triage Chart Before you make the service call… 1. Confirm the symptom from the customer. 2. Select that symptom from the chart. 3. Bring all the boards and cables listed for that symptom. 4. Follow the troubleshooting charts in the technical guides to isolate the board. 5.
  • Page 19 2019/01/15 23:07:08 (GMT+09:00) 1.0 No Power BM3J19 Board Model No Power Check STBY 3.3V Replace C805 Between G* Board to G* Board near CN800 BM3J19 Board Harness on BM3J19 board Harness BM3J19 Board u-Com Failure DDCON/LDO Main Device Failure SYS SET...
  • Page 20 2019/01/15 23:07:08 (GMT+09:00) 1.2 No Power u-com FAILURE P-on u-com control signal path summary BM3J19 Board LCD Model DDC : 1.0V_M3_CORE (IC608), 1.0V_M3_CPU (IC609), PGOOD_ +3.3V_STBY #pin6 1.0V_M_GPU (IC610) #pin9 BM3J Vdd u-com supply P_ON_#1 DDCs : 0.9V_BE (IC6602), 0.8V_BE (IC6604) #pin12 voltage DDCs : 5V_MAIN&5.0V_VBUS&5V_AUDIO (IC402), 3.3V_MAIN &3.3V_AUDIO(IC403),...
  • Page 21 2019/01/15 23:07:08 (GMT+09:00) 1.2 No Power u-com FAILURE P-on u-com control signal path summary BM3J19 Board OLED Model DDC : 1.0V_M3_CORE (IC608), 1.0V_M3_CPU (IC609), PGOOD_1 +3.3V_STBY #pin6 1.0V_M_GPU (IC610) #pin9 BM3J Vdd u-com supply P_ON_#1 DDCs : 0.9V_BE (IC6602), 0.8V_BE (IC6604) voltage #pin12 DDCs : 5V_MAIN&5.0V_VBUS&5V_AUDIO (IC402), BL_ON...
  • Page 22 2019/01/15 23:07:08 (GMT+09:00) 1.2 No Power u-com FAILURE BM3J19 Board LCD Model START Check 12V_MON Check 12.7V_MAIN Line Check VDD R822 Voltage. (from G board). C818 Voltage. Check 3.3V_STBY Line (C805, CN800 #9pin) Is the voltage >2.6V? Is the voltage >3.0V? Check DC_OFF_DET R824 Check TYPE_DET Change IC800...
  • Page 23 2019/01/15 23:07:08 (GMT+09:00) 1.2 No Power u-com FAILURE BM3J19 Board OLED Model START Check +12V_MAIN Line (from G board). Check “AC_OFF_DET_OUT” Check 12V_MON (GPIO_18 from IC7000) Check VDD R822 Voltage. Check “AC_DET_IN” C818 Voltage. Check 3.3V_STBY Line (C805, CN800 #9pin) Is the voltage >2.6V? (C826, CN800 #16pin Is the voltage >3.0V? from G board)
  • Page 24 2019/01/15 23:07:08 (GMT+09:00) 1.2 No Power u-com FAILURE BM3J19 Board LCD and OLED Model Previous page Check P_ON_#2 Check BL_ON CL812 R831 Change IC800 Change IC800 P-on u-com #pin13 (IC800) P-on u-com #pin7 (IC800) is >3.0V? Is the voltage >3.0V? Check P_ON_HL CL810 u-com IC800 is working OK Change IC800...
  • Page 25 2019/01/15 23:07:08 (GMT+09:00) 1.3 No Power DDCON/LDO BM3J19 Board Model Check item summary Output Board Operation IC Ref Voltage supply Enable pin Enable source Fuse Vcc ref. ref. BM3J19 IC400 1.2V_HDMI C434 R417 P-on u-com IC800 #pin13 C433 BM3J19 DC/DC IC401 1.8V_TU_P C402 D402 cathode P-on u-com IC800 #pin13...
  • Page 26 2019/01/15 23:07:08 (GMT+09:00) 1.3 No Power DDCON/LDO BM3J19 Board Model Check item summary Output Board Operation IC Ref Voltage supply Enable pin Enable source Fuse Vcc ref. ref. BM3J19 IC6600 1.8V_BE_LDO C6601 IC6601 #PIN5 P-on u-com IC800 #pin13 C6600 BM3J19 DC/DC IC6601 1.5V_BE_DDR C6606 IC6601 #PIN5...
  • Page 27 2019/01/15 23:07:08 (GMT+09:00) 1.3 No Power DDCON/LDO IC Ref Voltage supply BM3J19 Board Model IC601 1.2V_M3_DDR DDCON check START Check IC402 Vcc Check Vcc voltage Check Voltage C423 Change D600 C603 D600 Is voltage >12V? Is voltage >3V? Is diode alive? Check 3.3V_STBY. G* board Check Vcc voltage Check...
  • Page 28 2019/01/15 23:07:08 (GMT+09:00) 1.3 No Power DDCON/LDO Please refer page-25-28 for Ref number. BM3J19 Board Model START Board Operation IC Ref Voltage supply Check fuse Change Fuse BM3J19 DC/DC IC401 1.8V_TU_P F4xx / F6xx/F8xx/F66xx Is fuse OK? BM3J19 DC/DC IC402 5V_MAIN/5V_AUDIO BM3J19 DC/DC IC403 3.3V_MAIN/3.3V_AUDIO...
  • Page 29 2019/01/15 23:07:08 (GMT+09:00) 1.3 No Power DDCON/LDO LDOs check BM3J19 Board Model Pleas refer page 25-28 for Ref number. Board Operation IC Ref Voltage supply START BM3J19 IC400 1.2V_HDMI Check 3.3V_DDC_OUT BM3J19 IC602 1.05V_M3_STBY DDCON (IC403 on BM3J19) Check Vcc voltage BM3J19 IC603 1.05V_M3_ST_ET C4xx/C6xx/C66xx...
  • Page 30 2019/01/15 23:07:08 (GMT+09:00) 1.4 No Power – Muffin3 Failure Muffin Fail Suspected Muffin LOG is Write DDR check Replace DDR Is there DDR error? displayed bootloader Check Muffin Log Power uCom and Follow 1.2&1.3 related to eMMC Replace eMMC DDCON/LDO OK? Is there “CRC error” Crystal X1200 Replace crystal Is there 24MHz?
  • Page 31 2019/01/15 23:07:08 (GMT+09:00) 1.5 No Power – Muffin3 Replacement Muffin3 replacement flow eMMC need to be replaced when changing Muffin3. eMMC replacement Muffin3 replacement SW write SYS SET...
  • Page 32 2019/01/15 23:07:08 (GMT+09:00) 2.0 LED Blinking: 2x (Main power Error) BM3J19 2-time blinking Check “12.7V_MAIN” at pin 5~8 of CN800 G Board on BM3J19 Board, Voltage > 13.2V ? BM3J19 Board SYS SET...
  • Page 33 2019/01/15 23:07:08 (GMT+09:00) Check Point for BM3J19 Name Board PWB (A side) Detail CN800 BM3J19 CN800 5,7pin 12.7V_MAIN SYS SET...
  • Page 34 2019/01/15 23:07:08 (GMT+09:00) 2.1 LED Blinking: 3x (DC Alert Error) BM3J19 3-time blinking (DC Alert) Check “12.7V_MAIN” Check “5.0V_VBUS” at pin 5~8 of CN800 Retry at C431 on BM3J19 board on BM3J19 board, 4.959V<Voltage<5.285V? Voltage = 12.2~13.2V? BM3J19 Board G Board Detail of 3x LED Blinking Error Item Number of STBY LED Description...
  • Page 35 2019/01/15 23:07:08 (GMT+09:00) Check Point for BM3J19 Name Board PWB (A side) Detail B side CN800 5.0V_VBUS at C431 BM3J19 12.7V_MAIN Pin 5,7 of CN800 SYS SET...
  • Page 36 2019/01/15 23:07:08 (GMT+09:00) 2.2 LED Blinking: 3x (Audio Error) LED 3x blinking (Audio Error) Replace G Board G Board Power Off Check Go to 3.3 Measure the Speaker Replace impedance by multi-meter Speaker Less than 3Ω ? Power On Check Go to 3.4 Speaker Harness Detail of 3x LED Blinking Error Item...
  • Page 37 2019/01/15 23:07:08 (GMT+09:00) 2.3 LED Blinking 4x (LED Voltage Error) BM3J19 4-time blinking (LED Voltage) High Check “LD_ERR_DET” Voltage Replace LD board Panel at CL7224 on BM3J19 Board BM3J19 Board LD Board Detail of 4x LED Blinking Error Item Number of STBY Description LED flashing Uroboros2...
  • Page 38 2019/01/15 23:07:08 (GMT+09:00) Check Point for BM3J19 Name Board PWB (A side) Detail BM3J19 CL7224 LD_ERR_DET SYS SET...
  • Page 39 2019/01/15 23:07:08 (GMT+09:00) 2.4 LED Blinking 4x (BCM Error) BM3J19 4-time blinking (BCM Error) Check “LD_RDY” Replace High At CL7400 Panel LD board on BM3J19 Board BM3J19 Board LD Board Detail of 4x LED Blinking Error Item Number of STBY LED Description flashing Uroboros2 LD_ERR...
  • Page 40 2019/01/15 23:07:08 (GMT+09:00) Check Point for BM3J19 Name Board PWB (A side) Detail BM3J19 CL7400 LD_RDY SYS SET...
  • Page 41 2019/01/15 23:07:08 (GMT+09:00) 2.5 LED BLINKING: 5x (Panel ID Read Error) 5-times blinking Replace Replace BM3J19 Board Panel (T-con) Check Replace “+12.5V_TCON” G Board G Board Symptom Symptom on T-CON Board improvement improvement BM3J19 Board Panel (T-con) Symptom Replace the Harness improve Between G Board Harness and BM3J19...
  • Page 42 2019/01/15 23:07:08 (GMT+09:00) 2.6 LED BLINKING: 6x (Backlight Error) 6-times blinking Harness / Symptom Connection Check Voltage of Check Improvement broken High Replace “BL_ERR_DET” harness/connection Harness harness at CL7225 on BM3J19 G board to BM3J19 improvement Symptom Harness / G board Improvement Connection OK G board Replace G board.
  • Page 43 2019/01/15 23:07:08 (GMT+09:00) Check Point For BM3J19 Name Board PWB (A side) Detail BM3J19 CL7225 BL_ERR_DET SYS SET...
  • Page 44 2019/01/15 23:07:08 (GMT+09:00) 2.7 LED Blinking: 7x (Temperature Error)) 7-time blinking Symptom Replace BM3J19 improvement Setting Board, and Aging a few BM3J19 Board circumstance is OK? Set to another hours Temperature, location, etc. Ventilation, etc. Symptom Panel Replace Harness improvement from BM3J19 to H Harness board Symptom...
  • Page 45 2019/01/15 23:07:08 (GMT+09:00) 2.8 LED Blinking: 8x (4KBE Error) 8-time blinking Replace BM3J19 Board SYS SET...
  • Page 46 2019/01/15 23:07:08 (GMT+09:00) 3.1 No Sound for Speaker No Sound Speaker Check ・[Speakers] setting is [TV Speakers]? ・Nothing is connected to Headphone terminal and Bluetooth ? ・Volume setting is not too small? Measure the Speaker impedance by multi-meter Replace Speaker Less than 10Ω Then OK? More than 3Ω...
  • Page 47 2019/01/15 23:07:08 (GMT+09:00) 3.2 No Sound for Headphone out/Audio out/Opt out No Sound No Sound Headphone out / Audio out Opt out (Trinity only) Check [Settings] Check ・[Speakers] setting is [TV Speakers]? ・Volume setting is not too small? ・[Digital Audio Out] is [PCM] ? ・[Digital audio out volume] is [Max]? no sound Replace B-PWB...
  • Page 48 2019/01/15 23:07:08 (GMT+09:00) 3.7 No Sound: @ TUNER No Sound with normal picture Only RF tuner input? Please refer Audio Check IC1000 (SOC) troubleshooting SYS SET...
  • Page 49 2019/01/15 23:07:08 (GMT+09:00) 3.8 No Sound: HDMI1/2/3/4 No Sound Check the picture Refer to 4.5 HDMI NO PICTURE Check sound by other TV set Refer to 3.0 No Sound which is same model Check Source equipment Change B-Board. by Reference TV set Is Distributor used ? And inform the designer of it (For example, RB2, RB1)
  • Page 50 2019/01/15 23:07:08 (GMT+09:00) 4.0 No Picture No Picture Replace Check Smart Core Refer to the flow 1.0 the V by One FFC Got Any Normal and check the power Behavior Harness Display? (Blinking) supply problem (CN9200, 9201) Symptom improvement Refer to self diagnosis V by One FFC Refer to other part: Power supply problem...
  • Page 51 2019/01/15 23:07:08 (GMT+09:00) 4.1 : Video Analog Signal Path Video (Side Mini Jack) AL27:CVBS0P CVBS0P AP3:GPIO56 VIDEO_DET IC1000 SYS SET...
  • Page 52 2019/01/15 23:07:08 (GMT+09:00) 4.2 : No Picture (BM3J) No Picture Video No Picture Check J3200 Check if input OSD NG (Vpp: 0V) Connection, is GREY OUT VIDEO_DET OK if it is highlighted At R3207 OK (Vpp: 3.3 V) Detailed check all NG (Vpp: 0V) parts at VIDEO_DET signal Path [R3206] OK (Vpp: 3.3V)
  • Page 53 2019/01/15 23:07:08 (GMT+09:00) Condition Actions to be taken Refer to IC troubleshooting for Muffin [IC1000] Problem further investigation J3200 Connector Problem Change Connector J3200 Connectivity Problem Change Part Parts Broken SYS SET...
  • Page 54 2019/01/15 23:07:08 (GMT+09:00) 4.2/4.3 : Input Skip function (BM3J) Input Signal Non-Detect Detect (Typical) (Typical) VIDEO_DET Video 3.3V IC1000 AP3-GPIO56 Video (Side Mini Jack) SYS SET...
  • Page 55 2019/01/15 23:07:08 (GMT+09:00) 4.4 No Picture: @ Tuner RF input no picture / noisy picture Change RF cable and Check RF source cable antenna and antenna, OK? Check Tuner power line: Please refer DDCON 3.3V at JL2800 = 3.3V? troubleshooting 1.8V at JL2801 = 1.8V? *1 RESET value at JL2807 = 3.3V? *1 All broadcasting channel Check part mounting condition...
  • Page 56 2019/01/15 23:07:08 (GMT+09:00) 4.4 No Picture: @ Tuner From Previous page Digital Satellite Terrestrial/Cable Check Tuner power line 12V at JL2822 = 12V? Analog For TW, NA-ATSC(MX/UC), For AEP, JP, PA_T2, and LA-ISDB-T CH/HK, and LA- T2(COL) Refer Analog Tuning Refer Digital Tuning 1 Refer Digital Tuning 2 12V LNB Voltage Checking...
  • Page 57 2019/01/15 23:07:08 (GMT+09:00) 4.4 No Picture: @ Tuner (BM3J19) 1.8V BM3J19 (Top View) For Tuner Power Lines 3.3V JL2801 = 1.8V JL2822 = 12V BM3J19 Tuner potion(Top View) For Tuner Power Lines JL2800 = 3.3V JL2807 = RESET:3.3V BM3J19 Tuner potion(Bottom View) For Tuner Power Lines SYS SET...
  • Page 58 2019/01/15 23:07:08 (GMT+09:00) 4.4 No Picture: @ Tuner (BM3J19) BM3J19 (Top View) For Tuner I2C line C2803 R2801 C2804 R2800 R2804 R2805 SYS SET...
  • Page 59 2019/01/15 23:07:08 (GMT+09:00) 4.4 No Picture: @ Tuner FOR 12V LNB Voltage Checking: @ AEP and JP +12V_LNB Voltage Checking MOSFET Check LNB power line Check P_ON_HL signal line Check fuse F2801 Q408/Q409 +12V_MAIN at R495 = 12V? at CL809(R825) = 3.3V? broken Change the fuse Please confirm...
  • Page 60 2019/01/15 23:07:08 (GMT+09:00) 4.4 No Picture: @ Tuner (BM3J) CL809 BM3J (Top View) 12V LNB Voltage line R825 +12V_MAIN F2801 Q409 +12V_LNB Q408 R495 SYS SET...
  • Page 61 2019/01/15 23:07:08 (GMT+09:00) 4.4 No Picture: @ Tuner Notes: FOR ANALOG TUNING: @ All destination except JP - Parts for IFOUT_N line : FB2801, C2807, C2826 - Parts for IFOUT_P line : FB2802, C2808, C2825 - Parts for IFAGC line : R2809,R2838, C2827 For LA-ISDB(BR/AR), LA-T2(COL) and TW only : Insert correct signal in correct terminal.
  • Page 62 2019/01/15 23:07:08 (GMT+09:00) 4.4 No Picture: @ Tuner FOR DIGITAL TUNING 1: @ TW, NA-ATSC(MX/UC), and LA-ISDB-T. Digital Tuning 1 Notes: - Parts for IFOUT_N line : FB2801, C2807, C2826 - Parts for IFOUT_P line : FB2802, C2808, C2825 For TW/LA-ISDB-T - Parts for IFAGC line : R2809,R2838, C2827 LA-T2(COL:Cable) : Insert correct signal in correct terminal.
  • Page 63 2019/01/15 23:07:08 (GMT+09:00) 4.4 No Picture: @ Tuner (BM3J19) BM3J19(Top View) IF & IFAGC line C2826 C2825 (Under the heatsink) C2827 FB2801 C2808 C2807 R2838 FB2802 R2809 BM3J Bottom View SYS SET...
  • Page 64 2019/01/15 23:07:08 (GMT+09:00) 4.4 No Picture: @ Tuner FOR DIGITAL TUNING 2: @ AEP, JP, PA_T2, CH/HK, and LA-T2(COL) Digital Tuning 2 LA-T2(COL) For PA_T2 and For AEP/JP CH/HK Confirm ANT or Cable connection Confirm ANT or Satellite connection Terrestrial Digital cable/ Terrestrial Cable Sound is normal? No sound...
  • Page 65 2019/01/15 23:07:08 (GMT+09:00) 4.4 No Picture: @ Tuner (BM3J19) BM3J19 (Top View) TS1 line RB2802 BM3J19 Bottom View R3017 R3016 R3015 RB3001 R3014 BM3J19 Bottom View SYS SET...
  • Page 66 2019/01/15 23:07:08 (GMT+09:00) 4.5 No Picture: HDMI1/2/3/4 No Picture ① Check HDMIcable Change HDMIcable Check the below point at Check other Other Input is OK Connector side HDMI input ・Check +5V line CL4060/4061/4062/4063 ・Check HPD line CL3803/3805/3808/3810 All Inputs NG Other TV set Check Picture by other TV set +5V line OK Check IC1000...
  • Page 67 2019/01/15 23:07:08 (GMT+09:00) 5.0 Key Switch Buttons Error Check harness connection between Side key buttons error Harness connection issue B-board and switch module Change switch module Switch module issue Change harness between B-board to B-board to switch module switch module harness issue harness Main device issue Change B-board...
  • Page 68 2019/01/15 23:07:08 (GMT+09:00) 5.1 IR Remote Commander Error Check harness IR remote commander connection between Harness connection does not respond B-board and issue SmartCore Change harness B-board to SmartCore between B-board to harness issue SmartCore harness Change SmartCore SmartCore issue Change B-board Main device issue SYS SET...
  • Page 69 2019/01/15 23:07:08 (GMT+09:00) 5.2 Light Sensor Error Check harness Backlight level does Check UI setting Setting is connection and make sure not change when “ON” Harness connection between B- ambient light light sensor issue board and setting is “ON” changed SmartCore Setting is “OFF”...
  • Page 70 2019/01/15 23:07:08 (GMT+09:00) 6.0 Network Malfunction: Ethernet (Wired) [Network Set-up] >[Wired Set-up] on the TV Connection Connection Fail Connection Results Results B board Cable Connection Check Local Access Internet Access Failed Failed Failed Auto Check Proxy setting Wired Set-up Local router IP address setting Ethernet Cable DHCP server Manual...
  • Page 71 2019/01/15 23:07:08 (GMT+09:00) 6.2 Wireless Network Malfunction (1/2) 1) Internal Wireless Network malfunction Wireless Network on the TV Error message or no scan Is the Wi-Fi radio result appear in the network strength too weak Bxx Board setting? or even No signal? Check with another Hardware defect suspected.
  • Page 72 2019/01/15 23:07:08 (GMT+09:00) Wireless Network Malfunction (2/2) From previous page Check harness connection is OK Connect properly Loose harness between Wi-Fi/BT module and Bxx Change harness Check with between Bxx board Change Bxx board another Wi- and Wi-Fi/BT Fi/BT module module If Wi-Fi malfunction happens, •...
  • Page 73 2019/01/15 23:07:08 (GMT+09:00) 6.3 Bluetooth Malfunction Voice Remote doesn’t work Bluetooth Mouse/Keyboard/Controller doesn’t work Bluetooth Speaker/Headphone/ doesn’t work Please refer Voice Remote manual Home > Settings > Bluetooth Settings Bluetooth Mouse/Keyboard/Controller Can turn On BT Bluetooth Speaker/Headphoneoperation manual Can find the BT else devices Check harness...
  • Page 74 2019/01/15 23:07:08 (GMT+09:00) 6.4 Built in Mic Malfunction Built in mic doesn’t work [“Ok Google” detection] ⇒ On [Setup]>[Google] Please refer manual of >[“Ok Google” detection] how to use the built in Mic on the TV Check harness connection Connect properly Change Main harness between Mic I/F board and B Board Check Change Mic I/F board...

  • Page 75: Service Adjusment

    2019/01/15 23:07:08 (GMT+09:00) SECTION 4 SERVICE ADJUSTMENT When finished the operation of service mode , please AC Plug OFF/ON the TV set *If you don’t do AC plug OFF/ON, remain the Service Mode App and user can see the Service Mode after RC ON. 4.1 How to Enter Service Mode From Standby Mode 1.
  • Page 76 2019/01/15 23:07:08 (GMT+09:00) Summary of Service Control Function The flow of control Service mode on <Display or i+(info)> <5> <Vol. Up> <Power> Close Service menu <Home> Service mode off AC plug OFF Item up / down <↑> / <↓> Item select left/right <←>...
  • Page 77 2019/01/15 23:07:08 (GMT+09:00) Software Version In Service Mode, select “Model Information”, press “Enter” or → button to enter Status Information Main Micro Service Mode SW Version: PKG1.1.0.03.26.1.00.0 Model NVM Version: 0043 CEI Boot Version: V1.00000000 Model Information >> PQ Version: 02000001 Status Information Self diagnosis History >>...
  • Page 78 2019/01/15 23:07:08 (GMT+09:00) Serial Number Edit (1) In “Service Mode”, select “Model Information” by Service Mode pressing “↑” or “↓” then pressing “Enter” or “→” Model Information >> Self diagnosis History >> button to enter inside. Video / Audio >> Panel / PQ >>...
  • Page 79 2019/01/15 23:07:08 (GMT+09:00) Serial Number Edit (2) YES is selected, the input data is saved into Model EEPROM. SERIAL NUMBER EDIT is grayed out Status Information >> and the serial number that has been input is Model Information >> >> >> Model Number Setting displayed.
  • Page 80 2019/01/15 23:07:08 (GMT+09:00) Model Number Setting Service Mode 1) In “Service Mode”, select “Model Model Information” by pressing “↑” or “↓” then Model Information >> Status Information >> Self diagnosis History >> pressing “Enter” or “→” button to enter Model Information Video / Audio >>...
  • Page 81 2019/01/15 23:07:08 (GMT+09:00) WB Adjustment (If necessary) In “Panel/PQ” service mode category by “↑” or “↓”. Go to “WB Adjustment” Adjustment”, press → button. To select “WB To change data , press “←” or “→” on remote commander. Panel / PQ Back <<...
  • Page 82 2019/01/15 23:07:08 (GMT+09:00) WB/Mura/CUC data transfer(LCD Model only) Please apply Main board or panel is replaced. In “Panel/PQ” service mode category by “↑” or “↓”. Go to “WB/Mura/CUC data transfer” transfer”, press → button. To select “WB/Mura/CUC data To change data , press “←” or “→” on remote commander. Back <<...
  • Page 83 2019/01/15 23:07:08 (GMT+09:00) HDD Performance Check (EU only) In “Service Mode”, select Service Mode General Setting “General Setting” by >> Back << Model Information pressing “↑” or “↓” then Self diagnosis History >> Aging mode <[ ]> Video / Audio >> Ship Confirm >>...
  • Page 84 2019/01/15 23:07:08 (GMT+09:00) HDD Re-Register (EU Only) In “Service Mode”, select “General Setting” by pressing “↑” or “↓” then Service Mode General Setting Model Information >> Back << pressing “Enter” or “→” button to Self diagnosis History >> Aging mode <[ ]> enter inside.
  • Page 85 2019/01/15 23:07:08 (GMT+09:00) How to USB update 1:Download USB image and unzip file. 2: copy unzip file to USB memory root folder. 3: USB memory insert TV. 4-a:USB image is newer soft version. 4-b:USB image is not newer soft version. Automatically show message and start update. Automatically show message.

  • Page 86: Diagrams

    2019/01/15 23:07:08 (GMT+09:00) SECTION 5 DIAGRAMS Video signal 5.1 Block Diagram RGB LEDs Center Key Audio signal Light Sens. L/R Keys Control Bus * depend on destinations. IR Rx Temp Sens. * IR In BM3J19 board Panel ACAS * CI Flash eMMC Vx1 16-lane Power Micro Tcon...
  • Page 87 2019/01/15 23:07:08 (GMT+09:00) 5.2 Connector Diagram SB 55” SYS SET...
  • Page 88 2019/01/15 23:07:08 (GMT+09:00) SB 65” SYS SET...
  • Page 89 2019/01/15 23:07:08 (GMT+09:00) SB 75” SYS SET...
  • Page 90 2019/01/15 23:07:08 (GMT+09:00) SB 85” SYS SET...

  • Page 91: Panel Handling

    2019/01/15 23:07:08 (GMT+09:00) SECTION 6 PANEL HANDLING 6.1 Unpacking Caution: Does not apply when vacuum handling jig is used. 1. Take out panel from carton box by 2 operators. 2. Take out panel vertically from carton box. And do not hit other panel. Hit the back panel.
  • Page 92 2019/01/15 23:07:08 (GMT+09:00) 3. Please make protection for remaining modules to avoid abnormal hitting when take out modules. Example: Protection board Protection board Protection board Front view Side view SYS SET...
  • Page 93 2019/01/15 23:07:08 (GMT+09:00) Caution: Does not apply when vacuum handling jig is used. 4. Do not hold or press O-Cell. SYS SET...
  • Page 94 2019/01/15 23:07:08 (GMT+09:00) Caution: Does not apply when vacuum handling jig is used. 5. Put on to table & remove the protection bag. Caution: To avoid hitting the center area of bottom AL frame for smart core Support L/R must be used! Support L/R SYS SET...
  • Page 95 2019/01/15 23:07:08 (GMT+09:00) 6.2 Carrying Caution: Does not apply when vacuum handling jig is used. 1. Carry panel vertically. 2. Do not hold or press O-Cell. SYS SET...
  • Page 96 2019/01/15 23:07:08 (GMT+09:00) Caution: Does not apply when vacuum handling jig is used. 3. Hold panel by 2 people. 4. Do not hold the panel at the center area. SYS SET...
  • Page 97 2019/01/15 23:07:08 (GMT+09:00) 6.3 Placing To Table Caution: Does not apply when vacuum handling jig is used. Holding corner 1. Put the Panel by 2 operators. 2. Put the Panel within one flat table surface. SYS SET...
  • Page 98 2019/01/15 23:07:08 (GMT+09:00) 6.4 Other 1. Do not press the panel during assembly and disassembly. 2. Do not touch Panel module without gloves. SYS SET...
  • Page 99 2019/01/15 23:07:08 (GMT+09:00) 6.4 Other 4. Do not grasp the BC hook. 3. Do not grasp Source Shield. 5. Do not grasp the LD Shield. SYS SET...
  • Page 100 2019/01/15 23:07:08 (GMT+09:00) Sony EMCS (M) Sdn. Bhd. English SVPM 9-888-762-01 © 2019.01 SYS SET...
  • Page 101 Conditions of Use: (1) Please use this information only for the purpose of performing repair, maintenance and/or configuration services of the Sony products (hereinafter the “Repair services”) under the service agreement entered into with the Sony group company (hereinafter the “Service agreement”).
  • Page 102 2019/01/23 01:39:53 (GMT+09:00) REVISION HISTORY Version Date Subject 2019.01 1. 1 Issue SYS SET...
  • Page 103 2019/01/23 01:39:53 (GMT+09:00) MODEL LISTS MODEL REMOTE DESTINATION XBR-55X950G RMF-TX600U UC2, LA1 XBR-55X955G RMF-TX500B XBR-55X957G RMF-TX500B XBR-65X950G RMF-TX600U UC2, RMF-TX500U XBR-65X955G RMF-TX500B XBR-65X957G RMF-TX500B XBR-75X950G RMF-TX600U UC2, RMF-TX500U XBR-75X955G RMF-TX500B XBR-75X957G RMF-TX500B SYS SET...
  • Page 104 2019/01/23 01:39:53 (GMT+09:00) TABLE OF CONTENTS Section Title Page DISASSEMBLY AND REMOVAL CAUTION 1-1. Rear Cover Disassemble Method 1-2. Speaker Cover Disassemble Method DIAGRAMS 2-1. Circuit Board Location 2-2. Wire Dressing XBR-55X9*G XBR-65X9*G XBR-75X9*G Please refer Service Manual – Common for below EXPLODED VIEWS AND PARTS LIST information 3-1.

  • Page 105: Rear Cover Disassemble Method

    2019/01/23 01:39:53 (GMT+09:00) SECTION 1 DISASSEMBLY AND REMOVAL CAUTION 1-1 Rear Cover Disassemble Method SB 55”/65”/75” Front 1. Remove the screw of Rear Cover and remove AC-Cover/AC-cord. Sliding down 2. Pull up at Screw area on Rear Cover and unhook on to unlock Rear Cover (please see next page for the position of hook) Unhook both side...
  • Page 106 2019/01/23 01:39:53 (GMT+09:00) Hook Position (SB(55)) Hook Position (SB(65)) SYS SET...
  • Page 107 2019/01/23 01:39:53 (GMT+09:00) Hook Position (SB(75)) SYS SET...

  • Page 108: Speaker Cover Disassemble Method

    2019/01/23 01:39:53 (GMT+09:00) 1-2 Speaker Cover Disassemble Method 1. Remove the screw of SP Cover L/R. 3. After you remove the hook, pull it up. (please see page 9 for the position of screw) 2. Slide the SP cover hook sideways to remove it. Hook location (please see page 10 for the position of hook) If you pull the direction of...
  • Page 109 2019/01/23 01:39:53 (GMT+09:00) Screw Position Rear view left side Rear view right side ●Screw position(SB(55)) red circle ●Screw position(SB(65)) red circle ●Screw position(SB(75)) red circle ●Screw position(SB(85)) red circle SYS SET...
  • Page 110 2019/01/23 01:39:53 (GMT+09:00) Hook Position Rear view left side Rear view right side ● Hook position(SB(55)) Yellow Squares ● Hook position(SB(65)) Yellow Squares ● Hook position(SB(75)) Yellow Squares ● Hook position(SB(85)) Yellow Squares SYS SET...

  • Page 111: Diagrams

    2019/01/23 01:39:53 (GMT+09:00) SECTION 2 DIAGRAMS 2-1 Circuit Board Location 65” 55” G* BOARD B* BOARD WLAN/BT MODULE SWITCH UNIT B* BOARD G* BOARD WLAN/BT MODULE SWITCH UNIT 75” Smart Core HS8_SB MOUNT SWITCH UNIT G85 BOARD B* BOARD G84 BOARD WLAN/BT MODULE SYS SET...

  • Page 112: Wire Dressing

    2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 55” WIRE DRESSING WIRE DRESSING CONNECT CONNECT Overall View Overall View SYS SET...
  • Page 113 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 55” CONNECT Overall View CONNECT Overall View SYS SET...
  • Page 114 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 55” CONNECT 20P CONNECT 51P Overall View Overall View TAPE Overall View SYS SET...
  • Page 115 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 55” CONNECT 41P Overall View TAPE Overall View SYS SET...
  • Page 116 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 55” CONNECT Overall View CONNECT Overall View SYS SET...
  • Page 117 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 55” WIRE DRESSING Overall View CONNECT CONNECT 14P Overall View Overall View SYS SET...
  • Page 118 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 55” CONNECT Overall View CONNECT Overall View SYS SET...
  • Page 119 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 55” CONNECT Overall View WIRE DRESSING Overall View SYS SET...
  • Page 120 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 55” WIRE DRESSING Overall View WIRE DRESSING Overall View SYS SET...
  • Page 121 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 55” WIRE DRESSING Overall View WIRE DRESSING Overall View SYS SET...
  • Page 122 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 55” WIRE DRESSING Overall View CONNECT Overall View SYS SET...
  • Page 123 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 55” TAPE Overall View CONNECT Overall View SYS SET...
  • Page 124 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 55” TAPE Overall View TAPE TAPE Overall View Overall View SYS SET...
  • Page 125 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 55” TAPE Overall View TAPE Overall View SYS SET...
  • Page 126 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 55” TAPE Overall View CONNECT 30P CONNECT Overall View Overall View SYS SET...
  • Page 127 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 55” WIRE DRESSING SYS SET...
  • Page 128 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 65” WIRE DRESSING WIRE DRESSING CONNECT CONNECT Overall View Overall View SYS SET...
  • Page 129 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 65” CONNECT Overall View TAPE Overall View SYS SET...
  • Page 130 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 65” CONNECT 20P CONNECT 51P Overall View Overall View CONNECT 41P Overall View SYS SET...
  • Page 131 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 65” TAPE Overall View CONNECT Overall View SYS SET...
  • Page 132 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 65” CONNECT Overall View WIRE DRESSING Overall View SYS SET...
  • Page 133 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 65” WIRE DRESSING Overall View CONNECT 14P CONNECT Overall View Overall View SYS SET...
  • Page 134 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 65” CONNECT Overall View CONNECT Overall View SYS SET...
  • Page 135 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 65” CONNECT Overall View CONNECT Overall View SYS SET...
  • Page 136 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 65” WIRE DRESSING Overall View WIRE DRESSING Overall View SYS SET...
  • Page 137 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 65” WIRE DRESSING Overall View WIRE DRESSING Overall View SYS SET...
  • Page 138 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 65” WIRE DRESSING Overall View WIRE DRESSING Overall View SYS SET...
  • Page 139 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 65” WIRE DRESSING Overall View CONNECT Overall View SYS SET...
  • Page 140 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 65” CONNECT Overall View CONNECT 30P CONNECT Overall View Overall View SYS SET...
  • Page 141 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 65” WIRE DRESSING SYS SET...
  • Page 142 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” WIRE DRESSING WIRE DRESSING CONNECT CONNECT Overall View Overall View SYS SET...
  • Page 143 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” CONNECT Overall View TAPE Overall View SYS SET...
  • Page 144 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” CONNECT 30P Overall View TAPE Overall View SYS SET...
  • Page 145 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” TAPE Overall View CONNECT 20P Overall View SYS SET...
  • Page 146 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” TAPE Overall View TAPE Overall View SYS SET...
  • Page 147 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” TAPE Overall View CONNECT 51P Overall View SYS SET...
  • Page 148 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” TAPE Overall View CONNECT 41P Overall View SYS SET...
  • Page 149 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” TAPE Overall View TAPE Overall View SYS SET...
  • Page 150 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” CONNECT Overall View CONNECT Overall View SYS SET...
  • Page 151 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” WIRE DRESSING Overall View WIRE DRESSING Overall View SYS SET...
  • Page 152 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” TAPE Overall View CONNECT 14P CONNECT 4P Overall View Overall View SYS SET...
  • Page 153 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” CONNECT 2P CONNECT Overall View Overall View WIRE DRESSING CONNECT Overall View Overall View SYS SET...
  • Page 154 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” WIRE DRESSING Overall View CONNECT Overall View SYS SET...
  • Page 155 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” CONNECT Overall View CONNECT Overall View SYS SET...
  • Page 156 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” CONNECT Overall View WIRE DRESSING Overall View SYS SET...
  • Page 157 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” WIRE DRESSING Overall View WIRE DRESSING Overall View SYS SET...
  • Page 158 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” WIRE DRESSING Overall View WIRE DRESSING Overall View SYS SET...
  • Page 159 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” CONNECT Overall View CONNECT Overall View SYS SET...
  • Page 160 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” WIRE DRESSING Overall View CONNECT Overall View SYS SET...
  • Page 161 2019/01/23 01:39:53 (GMT+09:00) 2-2 Wire Dressing : 75” WIRE DRESSING Note: For positon of SHT, INSULATION ( Ref.No. 21 & 22 ) , please refer to Section 3 , 3-1. XBR-75X9*G SYS SET...

  • Page 162: Xbr-55X9*G

    2019/01/23 01:39:53 (GMT+09:00) SECTION 3 EXPLODED VIEWS AND PART LISTS  (*) Parts are not stocked since they are seldom required for routine service. •Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts. • and shaded parts are critical for safety.
  • Page 163 2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-55X9*G Exploded View XBR-55X950G XBR-55X955G XBR-55X957G REF. PART NO. DESCRIPTION CO1. • LABEL, UNDER TERMINAL (BGO) 4-746-596-01 • 4-746-596-11 LABEL, UNDER TERMINAL (BGO) • • 4-746-596-21 LABEL, UNDER TERMINAL (BGO) • 4-746-846-01 LABEL, SIDE TERMINAL (BGO) • • •...
  • Page 164 2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-55X9*G Exploded View XBR-55X950G XBR-55X955G XBR-55X957G REF. PART NO. DESCRIPTION CO1. 4-727-490-01 SHT, INSULATION (CCB M) • • • • 4-723-847-01 SLIDE CLAMP M (CCB) • • • • A-2229-109-A COMPL SVC BM3J19_UC_SB • A-2229-110-A COMPL SVC BM3J19_MX_SB •...
  • Page 165 2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-55X9*G Screws Q’ty Torque 0.5 ± 0.05 [N・m] SCREW M3X3.0 STEP 4-579-926-01 SCREW, +PSW M5X12 2-580-607-01 1.2 ± 0.1 [N・m] SCREW, ORNAMENTAL M6X12 4-268-126-02 0.4 ± 0.05 [N・m] SCREW, +PSW M3X6 4-472-518-11 0.4 ± 0.05 [N・m] SCREW, +PSW M3X6 W12 4-256-393-12 0.65 ±...
  • Page 166 2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-55X9*G Connectors REF. PART NO. DESCRIPTION REMARKS 1-910-112-87 CONNECTOR ASSY 14P CN6601(PSU)-CN1003(LD)(1) 1-912-895-11 FLEXIBLE FLAT CABLE 20P CN4801(B)-BT(1) 1-972-607-11 HARNESS ASSY (MAIN) CN1200(B)-KEY-HS-CN6001(MIC)(1) 1-972-608-11 HARNESS ASSY (PWR) CN9004(B)-SP-PZSP-CN800(B)-CN6401(PSU)-CON3(TCON)(1) 1-972-631-11 FLEXIBLE FLAT CABLE 30P CN8200(B)-CN1000(LD)(1) B-Board and T-CON Board A-5001-074-A FFC 41P 51P (TTK-I) SB55 [NOTE: If you exchange FFC-41P or FFC-51P for repair of set, you have...
  • Page 167 2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-55X9*G Other Parts XBR-55X950G XBR-55X955G XBR-55X957G PART NO. DESCRIPTION CO1. 4-535-064-13 ASSY,FALL LOCK,BELT LL • • • • 7-600-040-44 ADHESIVE (SV380C) 333CC GRY • • • • BAG, SCREW A (CCT) (*Includes SCREW, + 4-462-871-03 • • • •...

  • Page 168: Xbr-65X9*G

    2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-65X9*G Exploded View Stand SYS SET...

  • Page 169: Xbr-65X9*G

    2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-65X9*G Exploded View XBR-65X950G XBR-65X955G XBR-65X957G REF. PART NO. DESCRIPTION CO1. • LABEL, UNDER TERMINAL (BGO) 4-746-596-01 • 4-746-596-11 LABEL, UNDER TERMINAL (BGO) • • 4-746-596-21 LABEL, UNDER TERMINAL (BGO) • 4-746-846-01 LABEL, SIDE TERMINAL (BGO) • • •...
  • Page 170 2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-65X9*G Exploded View XBR-65X950G XBR-65X955G XBR-65X957G REF. PART NO. DESCRIPTION CO1. 4-727-497-01 SHT, INSULATION (CCB 2L) • • • • 4-723-847-01 SLIDE CLAMP M (CCB) • • • • A-2229-109-A COMPL SVC BM3J19_UC_SB • A-2229-110-A COMPL SVC BM3J19_MX_SB •...
  • Page 171 2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-65X9*G Screws Description Q’ty Torque 0.5 ± 0.05 [N・m] SCREW M3X3.0 STEP 4-579-926-01 SCREW, +PSW M5X12 2-580-607-01 1.2 ± 0.1 [N・m] SCREW, ORNAMENTAL M6X12 4-268-126-02 0.4 ± 0.05 [N・m] SCREW, +PSW M3X6 4-472-518-11 0.4 ± 0.05 [N・m] SCREW, +PSW M3X6 W12 4-256-393-12 0.65 ±...
  • Page 172 2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-65X9*G Connectors REF. PART NO. DESCRIPTION REMARKS 1-910-112-87 CONNECTOR ASSY 14P CN6601(PSU)-CN1003(LD)(1) 1-912-900-11 FLEXIBLE FLAT CABLE 20P CN4801(B)-BT(1) 1-972-609-11 HARNESS ASSY (MAIN) CN1200(B)-KEY-HS-CN6001(MIC)(1) 1-972-610-11 HARNESS ASSY (PWR) CN9004(B)-SP-PZSP-CN800(B)-CN6401(PSU)-CON3(TCON)(1) 1-972-631-11 FLEXIBLE FLAT CABLE 30P CN8200(B)-CN1000(LD)(1) B-Board and T-CON Board A-5001-077-A FFC 41P 51P (TTK-I) SB65 [NOTE: If you exchange FFC-41P or FFC-51P for repair of set, you have...
  • Page 173 2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-65X9*G Other Parts XBR-65X950G XBR-65X955G XBR-65X957G PART NO. DESCRIPTION CO1. 4-535-064-13 ASSY,FALL LOCK,BELT LL • • • • 7-600-040-44 ADHESIVE (SV380C) 333CC GRY • • • • BAG, SCREW A (CCT) (*Includes SCREW, + 4-462-871-03 • • • •...
  • Page 174 2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-75X9*G Exploded View Stand SYS SET...

  • Page 175: Xbr-75X9*G

    2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-75X9*G Exploded View XBR-75X950G XBR-75X955G XBR-75X957G REF. PART NO. DESCRIPTION CO1. • 4-746-596-01 LABEL, UNDER TERMINAL (BGO) • LABEL, UNDER TERMINAL (BGO) 4-746-596-11 • • 4-746-596-21 LABEL, UNDER TERMINAL (BGO) • • 4-746-846-01 LABEL, SIDE TERMINAL (BGO) • •...
  • Page 176 2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-75X9*G Exploded View REF. XBR-75X950G XBR-75X955G XBR-75X957G PART NO. DESCRIPTION CO1. 4-744-648-01 SHEET, THERMAL(BGO G) • • • • SHT, INSULATION L (CCB 3L) • • • • 4-727-523-01 4-727-527-01 SHT, INSULATION S (CCB 3L) SLIDE CLAMP M (CCB) •...
  • Page 177 2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-75X9*G Screws Q’ty Torque 0.5 ± 0.05 [N・m] SCREW M3X3.0 STEP 4-579-926-01 SCREW, +PSW M5X12 2-580-607-01 1.2 ± 0.1 [N・m] SCREW, ORNAMENTAL M6X12 4-268-126-02 0.4 ± 0.05 [N・m] SCREW, +PSW M3X6 4-472-518-11 0.4 ± 0.05 [N・m] SCREW, +PSW M3X6 W12 4-256-393-12 0.65 ±...
  • Page 178 2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-75X9*G SB(75) Important reminder of arrow mark indication for screw 60 mm There is a distance between SCREW and ARROW MARK like the picture above SYS SET...
  • Page 179 2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-75X9*G Connectors REF. NO PART NO. DESCRIPTION REMARKS 1-910-112-93 CONNECTOR ASSY 14P CN6601(PSU)-CN4004(LD)(1) 1-910-112-94 CONNECTOR ASSY 4P CN6602(PSU)-CN6402(PSU)(1) 1-912-374-11 CONNECTOR ASSY 2P CN6503(PSU)-CN6504(PSU)-CN6501(PSU)-CN6502(PSU)(1) 1-912-901-11 FLEXIBLE FLAT CABLE 20P CN4801(B)-BT(1) 1-972-611-11 HARNESS ASSY (MAIN) CN1200(B)-KEY-HS-CN6001(MIC)(1) 1-972-612-11 HARNESS ASSY (PWR) CN9004(B)-SP-PZSP-CN800(B)-CN6401(PSU)-J105(TCON)(1) 1-972-632-11 FLEXIBLE FLAT CABLE 30P...
  • Page 180 2019/01/23 01:39:53 (GMT+09:00) 3-1. XBR-75X9*G Other Parts XBR-75X950G XBR-75X955G XBR-75X957G PART NO. DESCRIPTION CO1. 4-535-064-13 ASSY,FALL LOCK,BELT LL • • • • 7-600-040-44 ADHESIVE (SV380C) 333CC GRY • • • • BAG, SCREW A (CCT) (*Includes SCREW, + 4-462-871-03 • • • •...

  • Page 181: Smart Core

    2019/01/23 01:39:53 (GMT+09:00) 3-2 . Smart Core REF. NO PART NO. DESCRIPTION 1-897-245-11 FPC-MIC(L) 1-897-245-21) FPC-MIC(R) 4-743-517-01 OP, INNER (BGO) 4-742-371-01 COVER, TOP (BGO) A-2229-207-A HS8_SB MOUNT 4-742-372-01 LIGHT, GUIDE ILM (BGO) 4-728-907-01 LIGHT, GUIDE OPT(CRT) 4-742-370-01 COVER, BTM (BGO) SYS SET...
  • Page 182 2019/01/23 01:39:53 (GMT+09:00) Sony EMCS (M) Sdn. Bhd. English SVPM 9-888-762-A1 © 2018.01 SYS SET...

This manual is also suitable for:

Kd-55xg95 seriesKj-55x95 g seriesXbr-55x95 g seriesKd-65x95 g seriesKd-65xg95 seriesKj-65x95 g series ... Show all

Table of Contents