Advertisement
Quick Links
STEREO SYSTEM RACK
SRC-401
ASSEMBLY INSTRUCTIONS
KENWOOD
KENWOOD
CORPORATION
©PRINTED IN U.S.A. B61-0417-00(K)(TOCAB))
R0210
¢ Be sure to check that all parts are accounted for before disposing of the
packing case.
¢ A Phillips screwdriver and a mallet are required for assembling.
* Be carefull not to damage the floor and rack.
Handling Precautions
* Tempered glass is used for the glass doors for providing sufficient strength.
However,
pay attention not to apply excessive force or to scratch the
doors. Cracking or breaking of the glass may occur.
¢ When moving the cabinet, remove all the components from the rack be-
fore carrying the cabinet. Also do not grasp the top shelf when carrying.
* To allow head radiation from the components, leave a space of 4 inches
between the cabinet and wall.
IMPORTANT SAFEGUARDS ~
A i
OF Read this page carefully to keep your safety.
1. Suffocation — After taking the unit out of the polyethylene bag, be sure to di-
spose of the polyethylene bag out of the reach of children. Otherwise, they may
play with the bag, which could cause hazard of suffocation.
5. Modification — Do not attempt to open or modify the unit, for this could cause
fire hazard or malfunction,
2. Water and moisture — Do not place a liquid container, such as a vase and water
basin, on the unit. Also avoid installing the unit in a place subject to emp,
6. Cleaning — Do not use thinner, benzine or alcohol. When cleaning the unit, wipe
with a soft, dry cloth.
3. Heat — Do not install the unit near a source of heat, such as a heater, or under
direct sunlight.
7. Abnormal smell — {tn the event the unit generates smoke or abnormal smell, im-
mediately switch the power OFF and unplug the power cord. After this, please
contact your dealer or nearest service station as soon as possible.
.
POWER OFF!
Advertisement
