Table of Contents
Advertisement
Indoor Unit Installation
The Indoor Unit Installation
• Select and mark the position for fixing bolts and
piping hole.
• Decide the position for fixing bolts slightly tilted
to the drain direction after considering the
direction of drain hose.
• Drill the hole for anchor bolt on the wall.
Ceiling
a
b
Level gauge
c
Ceiling board
CAUTION
• The air conditioner uses a drain pump.
• Install the unit horizontally using a level gauge.
• During the installation, care should e taken not
to damage electric wires.
NOTE
• Avoid the following installation location.
1
Such places as restaurants and kitchen where
considerable amount of oil steam and flour is
generated. These may cause heat exchange
efficiency reduction, or water drops, drain
pump malfunction. In these cases, take the
following actions;
• Make sure that ventilation fan is enough to
cover all noxious gases from this place.
• Ensure enough distance from the cooking
room to install the air conditioner in such a
place where it may not suck oily steam.
2
Avoid installing air conditioner in such places
where cooking oil or iron powder is generated.
3
Avoid places where inflammable gas is
generated.
4
Avoid place where noxious is generated.
5
Avoid places near high frequency generators.
The following parts is option.
INSTALLATION
13
Advertisement
Table of Contents
