Table of Contents
Advertisement
Digital Input
step 5
- To try out DIG.IN.01, point to and select
DIG.IN.01 from the labels in the System View Window
(see Figure 2-6).
Figure 2-6. Select Digital Input
As shown in Figure 2-6, DIG.IN.01 is the factory default
ital Inpi
resent
displayed on the line directly below the label in the
System View Window, This value can be displayed in
decimal (DEC), octal (OCT), or hexadecimal (HEX) format.
Binary values are displayed in octal format. If you have
more than one Digital I/O connected to your interface,
each additional Digital Input will be assigned a
sequentially numbered default label (i.e.DIG.IN.02,
DIG.IN.03, etc).
2-6
Trying Out Your Instrument
Advertisement
Table of Contents
