Sony CVP-M3 Operating Instructions Manual page 12

Setting Up
Load the video print cartridge with the VP mark according to the
following procedures.
Open the cartridge Insert the video print
Use only the video print cartridge and the video print paper compartment lid. cartridge firmly and
\f you load mismatched video print paper and video print
cartridge, the error message "Print paper and ink ribbon are
mismatched." appears on the screen and you cannot start
operation.
Note on handling video print cartridge
When you put the cartridge down, stand it as illustrated so that
dust will not get on the ink ribbon. Do not touch the ink ribbon or
place the cartridge in a dusty location. Fingerprints or dust on the
ink ribbon may result in imperfect printing.
Side of the unit
Open the lid while pulling down
the tab.
Ink ribbon
Close the lid
If the ink ribbon of the cartridge
is slack, rewind to remove the
slack, and then insert the
cartridge. If you insert a
cartridge with a slack ink
ribbon, the ribbon may be
damaged.
If the cartridge compartment
lid will not close
Remove the cartridge. and
then reinsert it.
12