Table of Contents
Advertisement
Setting Up
Function of the
buttons on the
remote
commander
The supplied remote commander
has the same basic operation
buttons as the main unit. It also
has some buttons to control the
tape transport of Sony video
equipment, which can be
selected by the COMMAND
MODE switch at the rear of the
commander. For details, refer to
"Location and Function of Parts
and Controls" on page 47.
A lithium battery is already
installed. If the operating range of
the commander becomes
noticeably short, replace the
battery with a Sony CR2025
lithium battery.
Point the head of the remote commander toward
the remote sensor on the printer. You can
operate the printer with the remote commander
within 5 meters (16 feet 5 inches) of the printer.
Remote
sensor
4
m
5 PPrOx. 39. prox 39
5
a
rene
Notes
e Keep the remote sensor of the printer away
from direct sunlight or the strong light of
lighting equipment.
e Be careful that there is no obstacle between
the printer and the remote commander.
How long is the battery life ?
In normal operation, the lithium battery will last
for about one year.
(Its life span depends on how offen the remote
commander is used.)
if the operating range of the commander
becomes noticeably short, replace the battery
with a Sony CR2025 lithium battery. Use of
batteries other than CR2025 may create a risk of
fire or explosion.
Caution on lithium battery
e Keep the lithium battery and the remote
commander out of the reach of children.
e Should the battery be swallowed, consult a
doctor immediately.
e Wipe the battery with a dry cloth to assure a
good contact.
e Do not hold the battery with metallic tweezers
as doing so may cause a short circuit.
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble or dispose of in
fire.
Advertisement
Table of Contents
