Removing Packaging - Bosch HBL33 Installation Manual

30" Units - under induction cooktop
Heat shield: Self positioning - 2 3/s" length,
Minimum required air clearance: 1" 26mm)
4" 31/3" 43/6"
{79mm} COUNTERTOP
A680
ioe A
eT 3 "(7emm}
72mm)
4
sy ny
vn
Fitting/
Conduit
23/4" 1/16" [>
(7omm) Q7 mm)
36" oven | 2813/4"
914
_e
QA7/r6"
sme)
291/16"
(621mm) , (738mm)
27 he
{687mm}
Ve
ten
ZY
TOE KICK
mim.
Note: Dimensions based on standard countertop height 36" with 43/4" toe kick
including base plate).
The built-in oven can be installed below the induction cooktop as jong as there
is an air clearance of 1" between the bottom of the cooktop and the top of the oven.
Removing Packaging
* Cut straps on outside of box.
* Remove cardboard box.
* Remove ail top and side cardboard and Styrofoam
braces.
« Place oven in front of cabinets where it is to be
installed.
* Unscrew unit from Left and Right Brackets as show in
"Left and Right Packaging Bracket Removal."
Left Packaging Bracket Removal
Note:
Different models use different packaging materials. Actual
brackets may look differently. Bracket remains in packaging
base. Unit should stay on packaging base until ready to be
lifted into cabinet cutout.
English 9