Table of Contents
Advertisement
en Declaration of Conformity
21 Declaration of Conformity
BSH Hausgeräte GmbH hereby declares that the appli-
ance with Home Connect functionality conforms to the
essential requirements and other relevant provisions of
Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found
online at siemens-home.bsh-group.com among the ad-
ditional documents on the product page for your appli-
ance.
BE
BG
FR
HR
MT
NL
SE
NO
5 GHz WLAN (Wi-Fi): For indoor use only.
AL
BA
5 GHz WLAN (Wi-Fi): For indoor use only.
22 Installation instructions
Observe this information when installing the appliance.
22.1 General installation instructions
Follow these instructions before you start with
the installation of the appliance.
¡ The safe operation of this appliance can
only be guaranteed if it has been installed
to a professional standard in accordance
with these installation instructions. The in-
staller shall be liable for damages incurred
as a result of incorrect installation.
¡ Check the appliance for damage after un-
packing it. Do not connect the appliance if
it has been damaged in transit.
¡ Before starting up the appliance, remove
any packaging material and adhesive film
from the cooking compartment and the
door.
¡ Proceed in accordance with the installation
sheets for installing accessories.
1
Only applies to Great Britain
34
CZ
DK
IT
CY
AT
PL
CH
TR
MD
ME
Hereby, BSH Hausgeräte GmbH declares that the ap-
pliance with Home Connect functionality is in compli-
ance with relevant statutory requirements.
A detailed Declaration of Conformity can be found on-
line at siemens-home.bsh-group.com/uk/ among the
additional documents on the product page for your
1
appliance.
2.4 GHz band (2400–2483.5 MHz): Max. 100 mW
DE
EE
LI
LV
PT
RO
IS
UK (NI)
MK
RS
¡ Fitted units must be heat-resistant up to
95 °C, and adjacent unit fronts up to
70 °C.
¡ Do not install the appliance behind a decor-
ative door or the door of a kitchen unit.
There is a risk of overheating.
¡ Cut-out work on the units should be carried
out before installing the appliance. Remove
any shavings. Otherwise, the correct opera-
tion of electrical components may be ad-
versely affected.
¡ The mains socket for the appliance must
either be located in the hatched area
outside of the area where the appliance is
installed.
Any unsecured units must be secured to
the wall using a standard bracket .
1
IE
EL
ES
LT
LU
HU
SI
SK
FI
UK
UA
or
Advertisement
Table of Contents
