Bosch SPV68U5 Installation Instructions Manual page 13

Attaching the Toe Panel
Your dishwasher comes with a two-piece toe panel
to al-low height adjustment.
1. Position the slotted rear toe panel on the
dishwasher first. Allow it to rest on the floor.
2. Position the mating front toe panel on top of the
rear toe panel allowing the angled edge to rest
on the mating edge of the dishwasher.
3. Drive the two black screws (A) through the holes
in the toe panel to secure. Use the supplied
screws to avoid damaging the dishwasher. See
Figure 24.
Figure 24
11