Yamaha RHINO FUEL INJECTION 700 FI 2008 Owner's Manual page 162

Table of Contents

Advertisement

To install the battery
TIP
Be sure the battery is fully charged.
1. Place the battery in its compartment.
2. Connect the positive battery lead first,
then the negative battery lead by install-
ing their bolt.
2
1. Positive battery lead (red)
2. Negative battery lead (black)
3. Hook the battery band.
4. Reinstall the battery compartment cover
by installing the quick fastener screws.
5. Close the hood.
NOTICE
Always keep the battery charged.
G
Storing a discharged battery can
cause permanent battery damage.
G
To charge a VRLA (Valve Regulated
Lead Acid) battery, a special (con-
stant-voltage) battery charger is re-
quired. Using a conventional battery
1
charger will damage the battery. If you
do not have access to a constant-volt-
age battery charger, have a Yamaha
dealer charge your battery.
8-49

Advertisement

Table of Contents
loading

Table of Contents