Hitachi VT-125E(VPS) Manual page 6

TSG ON/ OFF switch
RF channel control
UUOUOTTY H}
GOON 00000000000
ODONDDACO00EHD008
DUDN00NRORONOCOND
DOUODEC0G0008C0)
SIIInonng Anon non
2. Turn the OPERATE switch on.
set, operate as follows:
on the VTR.
Leave the TSG ON/OFF switch "OFF".
Playback a blank tape.
Press the Auto-tuning button.
changes to an exact tuning indicator.
OaPwn
PRE-TUNING OF BUILT-IN TV TUNER
Rea NP a NS A a
This VTR incorporates a complete television tuner with
the required tuning controls. Once you have pre-tuned
to preferred stations, you can select any of them by
merely pressing the CHANNEL select button.
—=——
Channel Preset Cover
Secondary control door
1. Turn the TV on and select the pre-tuned video
channel.
2. Turn the OPERATE switch of the VTR on.
4. Open the Channel Preset Cover.
AFC OFF button
SET buttons (Forward and Reverse}
SKIP button
PRESET button
bes
5. Press the PRESET button once.
The display indication changes from the clock time
display to the band indicator display.
Note: Pressing the button twice will lock the
display. If you have pressed it twice, press it once
more.
6. Press the CHANNEL select button on VTR to select
the channel to be memorized.
Notes:
1. The Channel! Number Display can be now con-
secutively selected from '00' through '73' and
then '95' through ''99"" and ""AUX" by pressing
the CHANNEL select button either upward or
downward. In this case, Channel Number may be
any number.
2. When "AFC" is not indicated in the display, press
AFC OFF button to display ''AFC".