Table of Contents
Advertisement
INSTANT RECORDING TIMER (IRT)
Fe
Instant Recording Timer allows you to make simplified
Notes:
timer recording
without using the programme timer.
1. The recording time can be extended any time during
There are two simplified methods as explained below.
IRT by pressing LENGTH
button.
The recording
time display will be reset to 0:30, 1:00, 1:30, 2:00,
3:00 or 4:00 as selected.
2. To stop the VTR during !RT, press LENGTH
button
until the recording time display reads 0:00, or press
OPERATE
switch and the STOP
button within ten
seconds.
3. To
change
the IRT
program,
the previous
infor-
mation must be first cleared.
4. If IRT and the program timer recording overlap, the
former will override the latter.
-
LENGTH
button
OPERATE switch
START button
To recall the IRT program
Press START or LENGTH button for recalling the start
time and the recording time.
In about 8 seconds the
displays return to the present time of day.
Note:
To recall the start time or the recording time,
press LENGTH
button only once.
Pressing more will
m@ FOR IMMEDIATE
RECORDING
change the recording time and cause a need for reset-
1. Insert the cassette (one with the erase prevention tab
ting.
intact) into the cassette loading door.
2:00, 3:00 and 4:00 every time the button is pressed.
Recording
starts when 0:30 is displayed.
During
recording, the remaining time is displayed.
4. At the end of recording the display reads 0:00; the
VTR will automatically stop recording.
Note: The IRT feature does not operate during play and
after a program timer recording has started.
During re-
wind mode,
the IRT recording will automatically start
after the tape is rewound fully to the end.
@ FOR SIMPLIFIED TIMER RECORDING
1. First perform Steps 1 and 2 of "FOR
IMMEDIATE
RECORDING".
2. Press START button to select the start time.
Each
press will change the clock display (the start time) by
increments
of 10 minutes
from
the
nearest
10
minutes of the hour.
3. Press LENGTH button for the recording time.
The counter display is reset to hours and minutes in
the order of 0:00, 0:30, 1:00, 1:30, 2:00, 3:00 and
4:00 every time the button is pressed.
4. Press OPERATE switch off, and the "©" indication
will appear on the Display.
The recording will start at
the time you
have selected
and will automatically
stop when the recording time display reads "0:00".
CHANNEL
select button
10
Advertisement
Table of Contents
