Manually - Toshiba COLOASTREAM 43AX60 Owner's Manual

Adding and erasing channels manually
After
you\'e plogramnled
the channds, VOUcan add o1 erase specific
channels.
To add or erase channels:
l. Select the channel you want to
add
or erase
using
Channel • or
• . If adding channels, VOtltiltlst select the channel to add by
using
the Channel Number buttons.
2. Press MENU, then press _ or 1_ until the SET UP menu
appears.
3. Press • or • to highlight ADD/ERASE.
43AX60 and 43AX60A
MENU
50AX60and 50AX60A
\
• IbTA
Channel V&
_SET UP
LANGUAGE ENGLESN
CLOCK SET
ANT%'2 ANTI
TVICABLE OABLE
MENU AT•_
Channel ,&V
4. Press 4 or 1_ to select ADD or ERASE, whichever function VOU
want to perform.
5. Repeat steps 14 for other channels VOU want to add or erase.
Changing channels
To change the channel, you can:
• change the programmed channels using the remote control
• select a channel directl v using the remote control
• scan the channels using theTV buttons
To change to the next programmed channel:
Press Channel • or • on the "IV or remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100).
For example, to select channel 125, press the 100 button, the 2
button, and the 5 button.
Adjusting the color convergence
This projection TV uses three separate TV tubes: a red one, a green
one, and a blue one. The red, green, and blue images are projected
onto the screen where they converge to form a fiJll color picture. You
can see a clear picture only when the v converge correctl?:
Convergence may drift over time or if you move the TV. If you can
see clear images on the screen, skip this procedure.
This adjustment should be made after the TV has been on for at least
30 minu tes.
24