Toshiba COLOASTREAM 43AX60 Owner's Manual page 10

Connecting an A/V receiver
If you use a system that delivers Dolby Pro Logic* surround sound,
you will probably want to use tbe TV speakers as center channel
speakers.
A center channel speaker adds to tbe realism of a surround sound
system sttch as Dolby Pro Logic.
You will need:
• one pair of audio cables
• one video cable
• one audio cable for audio center channel
To A/V receiver
1
I \
Video TV Center From
out in out Antenna
Connection example of Dolby Pro Logic surround system
Audio Video
A/V receiver
TV
|
• NlgnI
Caution:
Make sure d_eTVis turned off betor_
connecting oJdisconnecting an audio cable to
the Audio Center ChannelIN jack to avoid
damaging the speaker:
Note:
Refer to the instructions furnished with the
connected A/V r_ceiver for detailed surround
system
When the Audio Center Channel ON/OFF
switch b b the ON position, the TVspeaker_
win function only as the center channd
speakers
Adjust the volume for center channel
speakers with the center bve/ control on the
A/V r_cdvel:
ff you use the TVspeakels asnorrnd
speakers,set the Audio Center Channel
ON/OFF switch to the OFFposition
* "Dolby Pro Logic"is a I_gistel_d tl_,derT_al?
of De/by Labomtolies Licensing
Colporation
Surround _ Surround
speaker L speaker R
10