3 Using the Heater
Wi-Fi connection
Setting up the Wi-Fi connection for the first time
1
Download and install the Philips "Air+" app from the App Store or
Google Play�
2
Put the plug of the Heater in the power socket and touch
turn on the Heater.
» The Wi-Fi indicator
3
Make sure that your smartphone or tablet is successfully connected to your
Wi-Fi network.
4
Launch the "Air+" app and click on "Connect a New Device" or press the "+"
button on the top of the screen. Follow the onscreen instructions to connect
the Heater to your network.
Note:
This instruction is only valid when the Heater is being set up for the first time.
•
If the network has changed or the setup needs to be performed again, see
Chapter "Reset the Wi-Fi connection" on page 6�
If you want to connect more than one Heater to your smartphone or tablet, you
•
have to do this one by one.
Make sure that the distance between your smartphone or tablet and the Heater
•
is less than 10 m without any obstructions.
Reset the Wi-Fi connection
Note:
Reset the Wi-Fi connection when your default network has changed.
•
1
Put the plug of the Heater in the power socket and touch
Heater.
2
Touch and hold
» The Heater goes to pairing mode.
» The Wi-Fi indicator
3
Follow the steps 3-4 in "Setting up the Wi-Fi connection for the first time"
section.
EN
6
blinks for the first time.
for 3 seconds until you hear a beep.
blinks.
to
to turn on the