Storage; Troubleshooting - Philips 5000 Series User Manual

5 Storage

1
Turn off the appliance and unplug from the power socket.
2
Clean the appliance.
3
Store the appliance in a cool, dry location.
4
Always thoroughly wash hands after cleaning.

6 Troubleshooting

This chapter summarizes the most common problems you could encounter with
the appliance. If you are unable to solve the problem with the information below,
contact the Consumer Care Center in your country.
Problem
My heater is not
working after
plugging.
My heater is
tripping during
use.
Possible solution
The plug may not be connected properly to an electrical
•
outlet. Check whether the plug is properly connected to a
working electrical outlet.
The appliance is equipped tip-over protection, ensure to
•
locate the appliance in upright position and at flat surface.
If the appliance doesn't produce warm airflow, check if it
•
is on Ventilation mode.
Check your temperature settings in Auto mode. When
•
the set target temperature is lower than the ambient
temperature, the heating function will not be triggered.
The power exceeds the home circuit load. Please unplug
•
nearby high-power appliances on the same electrical
outlet and try again.
If your heater fails to power on again on a working
•
electrical outlet, please contact Consumer Care Team in
your country.
EN
11