Bosch Sensortec | BME280 User Manual
3.2 Upgrading Firmware
3.2.1 For App 2.0 Board:
To upgrade the firmware of DD2.1 UI to match the current version, follow the steps below:
Click Menu -> Settings-> Firmware Upgrade. The following window appears:
Click Enter Boot mode.
▪ Switch off board, and press Switch 2.In Application board, all four LEDs will glow simultaneously.
▪ Click OK.
▪ All four LEDs will glow simultaneously.
▪ Press OK.
© Bosch Sensortec GmbH 2023 | All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution,
as well as in the event of applications for industrial property rights
Figure 9 : Firmware upgrade window
Figure 10 : Application Boot Loader
9 | 23
Document number: BST-BME280-DSxxx-yy