Introduction; Product Liability; Machine Description - Husqvarna Blastrac BMG 2200RC Operator's Manual

Before use, operators must be provided with information, instruction and training for the use of the machine
and the substances for which it is to be used, including the safe method of removal and disposal of the material
collected. All persons who are working with or maintaining this machine must read the manual carefully and
understand it fully. In case you sell the unit, hand this manual over to the next owner.
Keep this manual always with the machine, to enable it to be referred to at any time.
Any other work not covered by this operating manual must not be carried out. Always use common sense when
working with machines.
This machine is designed for industrial use by professionals. Only authorized and trained personnel may operate
this machine. This machine is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge. Husqvarna offers a course on the use of the machine
in order to make the operating and maintenance personnel familiar with all elements of the machine.
Note: Make sure that you load the batteries weekly to keep them in good working condition.
1.1

Product liability

As referred to in the product liability laws, we are not liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service center or by an approved authority.
The BMG 2200RC ride-on three-head grinder is an electrical driven planetary grinding machine. The machine is
designed for levelling and polishing of indoor concrete / stone floors. The 3 independently controllable grinding
heads are fitted with 3 rotating discs per grinding head. The 9 planetary rotating discs have a diameter of
Ø 240 mm. The rotating discs can be fitted with a wide range of different tools, ensuring a perfect finish for any
job. The machine is suitable for dry and wet applications. The BMG 2200RC can be used on almost any floor to
plane, to make ready for coatings, or to remove coatings or glue residues. The specially designed Husqvarna
dust collection system ensures low-dust operation of the machine and clean air at the workspace.
21.07.2023

1. Introduction

2. Machine description

5