Table of Contents
Advertisement
TECHNICAL DATA
erties, expressed in numerical values with statement of tolerances are guaranteed by the factory.
1erical values without tolerances are intended for information purposes only and indicate the
erties of an average instrument.
numerical values hold good for nominal mains voltage.
{CTRICAL
Internal triggering
Repetition rate
Jitter
Temperature coefficient
External triggering
Triggering: input voltage
input impedance
frequency range
Gating:
input voltage
Triggering delay
Single-shot operation
Pulse width
Range
Duty cycle
Jitter
Temperature coefficient
Pulse delay
Range
Jitter
Temperature coefficient
1Hz... 100 MHz
Variable in 9 ranges with continuous control
within the ranges
Less than 0.1 % or 50 ps whichever is greater
Less than 0.1 % per °C
+ 1.2 V required to gate the generator
approx. 1 kQ
DC ... 50 MHz
+1.2V
From TRIGG IN to SYNC OUT approx. 12 ns
Single-shot facility by means of push-. button
5 ns... 100 ms
Variable in 8 ranges with continuous control
within the ranges
Approaching 100% using inverted-pulse
output (limited only by minimum width)
greater than 50% in normal operation
Less than 0.1°%o or 50 ps whichever is greater
0.1% per °C
5 ns... 100 ms
Variable in 8 ranges with continuous control
within the ranges
Less than 0.1%o or 50 ps whichever is greater
0.1% per °C
Advertisement
Table of Contents
