Removing The Cabinet; Removing The Knobs - Philips PM 5775 Manual

47
A. REMOVING THE CABINET ~
2. Removing the cover plate and bottom plate
— Loosen the screws at the rear.
— Pull out the plates in backward direction.
— When refitting the bottom plate it should be observed that the notch in the
bottom plate is slippéd underneath the fitting assy.
3. Removing the tilting assembly.
— Move the small outermost nylon slides "A" inward (Fig. VIH-1).
— Remove the tilting assembly.
Fig. VIl-1. Tilting assembly
B. REMOVING THE KNOBS (Fig. VIII-2)
— Remove knob cap A.
— Loosen nut B.
The knob can now be pulled off the spindle.
— At switching knobs, loosen nut C.
For releasing the clamping cone, tap the spindle carefully in the axial direction
while holding the knob.
Fig. VIII-2. Removing the knobs