Pioneer QUANTUM INVERTER Series Service & Troubleshooting Manual page 96

3.1.3. Panel Plate Disassembly (PT-4)
Procedure
1) Turn off the air conditioner and the
power breaker.
2) Remove the screws of the big handle
and then remove the big handle
(2-3 screws) (see Fig. 1).
3) Remove the screws of the top cover
and then remove the top cover (4
screws). Two of the screws are found
underneath the big handle (see Fig. 2).
Note: This section is for reference only. Actual unit appearance may vary.
YN024GMFI22RPE / YN030GMFI20RPD / YN036GMFI20RPD
Illustration
Top Cover
Outdoor Unit Disassembly

Scope of Models Covered:
(Some Models) 3 Screws
Figure 1
Figure 2
13

Big Handle