Sony TA-F545R Service Manual

TA-FO4oR/FO4oR
SERVICE MANUAL
AEP Model
Photo : TA-F645R
SPECIFICATIONS
Amplifier
Continuous RMS power output (both channels driven
simultaneously)
Model for Scandinavian countries, Switzerland, Spain and Portugal
DIN, 1 kHa| 8 ohms 100 W +100 W| 75 W +75 W
20 Hz - 20 70W+70W | 55W+55W
kHz
Model for other countries
P| Tera | Ta
DIN, 1 kHz|4 ohms [125 W + 125 W 95 W +95 W
[8 ohms |100 W + 100 W 75 W +75W
20 Hz - 20 70W+70W | 55W+55W
kHz
Input
inputjack [ack ype
TUNER, CD, AUX, 150 mV Bi idlohans
S/N
ae TAR
PHONO WMA Sa
PHONO (MC)* A, 0.5 mV 76 dB | |
100 dB TUNER, CD, AUX, 100 dB
| TAPE 1/DAT,
TAPE 2/MD
~ *PHONO (MC): only for TA-F645R
Output
Output jack Jack type | Voltage/impedance
REC OUT Phono jack — | Voltage 150 mV Impedance 1
kohm
SPEAKERS Model for Scandinavian
countries, Switzerland, Spain
and Portugal: 8 - 16 ohms
Model for other countries:
4-16 ohms
HEADPHONES _| Stereo phone
jack
Tone controls
[_Tresponse
BASS +10 dB (100 Hz) 300 Hz
TREBLE +10 dB (10 kHz) 5 kHz
Harmonic distortion Less than 0.008 % at 10 W output
Intermodulation (IM) distortion (60 Hz : 7 kHz = 4:1)
Less than 0.008 % at 10 W output
PHONO: RIAA equalization curve
+0.5 dB
TUNER, CD, AUX, TAPE 1/DAT,
TAPE 2/MD: 7 Hz —- 100 kHz *8 dB
Less than 170 pV (network A)
60 (8 ohms, 1 kHz)
Accepts low and high
impedance headphones
Turnover frequency
Frequency response
Residual noise
Damping factor
— Continued on next page —
INTEGRATED STEREO AMPLIFIER
SONY.