Toshiba GF630 Instruction Manual page 13

3.1.3 Appearance of Detector GF632
Separate
for Excitation cable
Ground terminal
for detector
Note: The ground cables are included in the package, so install them to flanges as shown in the Fig.4.5
as needed. (The screws are equipped to detector flanges.)
for Signal cable
Hanging hook
*Provided for upper 8 inch
(200mm to 600mm)
Grounding ring
( Provided for PTFE lining only )
Figure 3.1.3 Appearance of Detector GF632
− １２ −
Terminal Box
Flange
Ground cable*
６Ｆ８Ａ０８８２
Terminal Box Cover
Flow direction arrow