Troubleshooting - Silvercrest SDM 1500 C2 Operating Instructions Manual

Troubleshooting

Programme
The appliance is
not working .
The appliance
produces no steam .
The pump makes
unusually loud
noises .
A whitish edge
forms on the floor
when the appliance
stops briefly during
operation .
SDM 1500 C2
Possible causes
The plug is not connected .
The "Steam" button r has
not been pressed .
There is no water in the
water tank 8 .
The filter 7 is blocked .
No steam setting has
been selected .
There is no water in the
water tank 8 .
Lime has collected .
Possible solutions
Connect the appliance to a
mains power socket .
Press the "Steam" button r .
Fill the water tank 8 with
tap water .
Change the filter 7 .
Use the MODE button e to
select the desired level of steam .
Fill the water tank 8 with
tap water .
Wipe the limescale away with a
damp cloth . If necessary, add a
little descaler onto the cloth .
GB │ IE │ NI │ CY │ 13 ■