Troubleshooting - Silvercrest SIKP 2000 D1 Operating Instructions Manual

SilverCrest SIKP 2000 D1

9. Troubleshooting

If your induction hotplate does not work as normal, follow the instructions below to try to solve the
problem. If working through the tips below does not fix the fault, please contact our hotline (see
"Guarantee information" on page 24).
Risk of electric shock!
Never try to repair the device yourself.
Problem
Induction hotplate
not working
Heating zone (2)
not getting hot
Error E0 is shown
on the display (7)
Error E3 is shown
on the display (7)
Error E6 is shown
on the display (7)
Error E1, E2, E4,
E5, E7, E8 or Eb is
shown on the
display (7)
22 - English
Possible causes
Mains cable not connected
Child lock activated.
No pan on the heating
zone (2)
Cookware not suitable for
induction
No pan on the heating
zone (2)
Cookware not suitable for
induction
Cookware is too small in
diameter or not standing
centrally on the heating
zone (2).
Hotplate temperature too high
Empty pan
Empty pan or cooling fan
defective
Technical fault
Remedy
Connect the mains cable to a live wall socket.
Press and hold the button (8) for 3 seconds to
deactivate the child lock.
Place a pan on the heating zone (2).
Only use cookware which is suitable for
induction hotplates.
Place a pan on the heating zone (2).
Only use cookware which is suitable for
induction hotplates.
Only use cookware with a diameter of between
16 and 26 cm and place it on the centre of the
heating zone (2).
Wait a few minutes until the heating zone (2)
has cooled down.
Fill the pan with food.
Fill the pan with food. If the pan was filled and
error E6 is still displayed, the cooling fan may
be defective. In this case, contact our hotline.
See the "Warranty information" on page 24.
Contact our hotline. See the "Guarantee
information" on page 24.