Towing Pin - Hitachi ZW140-6 Operator's Manual

Towing Pin

d
WARNING: Since towing is a potentially dangerous
operation, perform only when there is an emergency
and crisis situation.
IMPORTANT: Available towing forces by machine model
are as follows. To prevent excessive wear of tires, avoid
towing operation requiring more than the available
towing force.
Available towing force
ZW140-6: 94.5 kN (9640 kgf) (21245 lbf)
ZW150-6, 150PL-6: 104 kN (10600 kgf) (23380 lbf)
Towing pin (4) is located on the rear end of the base machine.
It is used for towing other machine or fastening the machine
on a trailer deck for transportation. Tie or loop the towing rope
and let it pass through the hole. Secure it with the β-shaped
lock pin (5).
OPERATOR'S STATION
1-111
5
4
MPTC-01-007
4
MPTC-01-008