Notation for Areas of Concern
Inspection performed by:
Item
CAUTION
If you leave the key in the key switch, someone could accidently start the engine and seriously injure
you or other bystanders.
Remove the key from the key switch before you do any maintenance.
Pre-Maintenance
Procedures
Pre-Maintenance Safety
•
Before adjusting, cleaning, repairing, or leaving the
machine, do the following:
– Park the machine on a level surface.
– Move the throttle switch to the low-idle position.
– Disengage the cutting units.
– Lower the cutting units.
– Ensure that the traction is in neutral.
– Engage the parking brake.
Date
Figure 30
Service Interval Chart
– Shut off the engine and remove the key.
– Wait for all moving parts to stop.
– Allow machine components to cool before
performing maintenance.
•
If the cutting units are in the transport position, use the
positive mechanical lock (if available) before you leave the
machine unattended.
•
If possible, do not perform maintenance while the engine
is running. Keep away from moving parts.
•
Use jack stands to support the machine or components
when required.
•
Carefully release pressure from components with stored
energy.
35
Information
decal120-0259