A Look At The Plc Adapter - Sharp HN-VA401SU Operation Manual

A Look at the PLC Adapter

A Look at the PLC Adapter
Front
SET button
1
This button is used to register the adapter on the network.
The two adapters in the HN-VA401SU kit have already been
registered. Registration using the SET button is only necessary
when you have purchased an additional adapter, or have canceled
the registration of an adapter. (The SET button is also used to
cancel the network registration of the adapter.)
POWER indicator
2
This lights green when the power is on (see page 16).
PLC indicator
3
This lights steadily when communication is possible, and blinks
when communication is taking place (see page 16).
Power cord
4
Plug this into an electrical outlet to connect the adapter to the
network.
6
1
2 3
4