Silvercrest SCHW A1 Operation And Safety Notes page 14

Connecting the cable
1. Connect the holder
with the car charger
using the Micro USB to
USB type A cable
2. Plug the car charger
into a 12V/24V
8
car socket. The LED
indicator 2
for 3 seconds and then goes off to show that the
product is receiving current.
NOTE: If you would like to use this Qi wireless
charging holder at home or office, please connect the
holder with a Quick Charge 3.0 compatible wall USB
charger (not included).
NOTE: The car holder should only be used when
the car engine is running, otherwise the car battery will
be discharged.
Charging your mobile device in the holder
1. Make sure the holder is in a vertical position and
facing you.
2. Put your mobile device in the holder making sure
that it is aligned with the Qi charging area
holder. The smartphone grab rails
will grip the mobile device using the weight of the
inserted mobile device. The mobile device will then
be firmly in place. Charging will begin on contact.
NOTE: This holder should not be used in a
horizontal position.
Protective covers that protect the mobile device may
interfere with the charging process. In this case, the
mobile device must be removed from the protective
cover.
US-EN 14
8
.
7
lights up
1 of the
of the holder
6