Bosch CMG7241 1A Series User Manual And Installation Instructions page 16

Table of Contents

Advertisement

en Microwave
Cookware that is not microwave-safe
Note: Observe the specifications for preventing mater-
ial damage.
→ "Microwave", Page 6
¡ Metal cookware and bakeware
Microwaves cannot pass through metal. The food is
barely heated or not heated at all. Metal may create
sparks in microwave-only operation.
Cookware when adding microwave to an operating
mode
If you switch on the microwave for another operating
mode, metal is also an option, in addition to
microwave-safe cookware and accessories:
¡ Metal cookware and bakeware
Metal must be kept at least 2 cm from the cooking
compartment walls and the inside of the door.
Always place metal cookware or bakeware in the
centre of the supplied wire rack.
¡ Accessories supplied:
Wire rack
Universal pan
Baking tray
Testing cookware for microwave suitability
If you are unsure whether your cookware is suitable for
use in the microwave, carry out a cookware test.
ATTENTION!
Operating the appliance without food in the cooking
compartment may lead to overloading.
Do not switch on the microwave unless there is food
inside. The only exception to this rule is when per-
forming a short cookware test.
WARNING ‒ Risk of burns!
The accessible parts of the appliance become hot dur-
ing operation.
Never touch these hot parts.
Keep children at a safe distance.
Place the empty cookware in the cooking compart-
1.
ment.
Set the appliance to run for 30 seconds to 1 minute
2.
at maximum power.
Start the operation.
3.
Check the cookware several times:
4.
If the cookware remains cold or warm to the
touch, it is suitable for microwave use.
If the cookware becomes hot or sparks are cre-
ated, stop the cookware test. The cookware is
not microwave-safe.
16
10.2 Setting options with the microwave
The microwave can be used on its own, or in combina-
tion with a different operating mode.
Microwave-only operation
The electromagnetic waves of the microwave alone
generate energy and this is converted into heat in food,
for example.
Added microwave
Adding the microwave to an operating mode reduces
the cooking time.
You can combine the microwave with the following
functions:
¡ Types of heating → Page 13
– 2D hot air
– Top/bottom heating
– Circulated air grilling 
– Full-surface grill
– Centre-area grill
¡ → "Dishes", Page 17
Possible microwave outputs combined with an
operating mode include:
¡ 90 watts
¡ 180 watts
¡ 360 watts
10.3 Setting the microwave
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡ → "Microwave output settings", Page 10
¡ → "Cookware and accessories with microwave",
Page 15
Press "Microwave" in the menu.
1.
Or select the microwave directly using the
ton.
Press the
microwave output ("Boost").
2.
Use the setting ring to set the microwave output.
3.
To confirm the set microwave output, press
4.
the display.
Press
⁠ " Cooking time".
5.
A cooking time must always be set to operate the
microwave.
To change the preset cooking time, press the relev-
6.
ant time value, e.g. minute display "m" or second
display "s".
a The selected value is marked in blue.
Use the setting ring to set the cooking time.
7.
If required, use
to reset the setting value.
To confirm the set cooking time, press
8.
play.
Press
to start the operation.
9.
a The microwave starts and the cooking time counts
down. The display shows the performance reduction
for the maximum microwave output "Boost".
→ "Microwave output settings", Page 10
a When the time has elapsed, a signal sounds. A noti-
fication appears on the display confirming that the
operation has finished.
Once the cooking time has elapsed:
10.
but-
on
on the dis-

Advertisement

Table of Contents
loading

This manual is also suitable for:

8 seriesCmg7241b1a

Table of Contents