Cleaning & Storage - PowerXL VORTEX PRO 8QT Use & Care Manual

Cleaning & Storage
Clean the appliance after each use. The Basket and Fry Tray are coated with a special
nonstick surface. Never use abrasive cleaning materials or utensils on these surfaces.
Remove the Power Cable from the electrical outlet and be certain the appliance
1.
is thoroughly cooled before cleaning.
Wipe the outside of the appliance with a warm, moist cloth and mild detergent.
2.
Remove the Fry Tray from the completely cool Fry Basket. Remove any liquid from
3.
the bottom of the Fry Basket.
Clean the Basket and Fry Tray, with hot water, a mild detergent, and a nonabrasive
4.
sponge. The Fry Tray is dishwasher safe, but hand-washing is recommended. For
difficult-to-remove food, soak in hot, soapy water for 10 minutes.
NOTE: If the Silicone Bumpers on the Fry Tray need to be cleaned, they can be
5.
removed and reattached. To remove the bumpers, locate the capped end of
the bumper and push the capped end off of the Fry Tray. There will be some
resistance, but keep pushing until the bumper slide off of the Fry Tray. To
reattach the bumper, slide each bumper onto the slot on the Fry Tray.
6. Clean the inside of the appliance with hot water, a mild detergent, and a nonabrasive
sponge.
If necessary, remove unwanted food residue from the heating element with a soft
7.
cleaning brush.
Rinse the appliance with a clean, damp cloth. Use a clean, dry cloth to dry the
8.
appliance interior. Do not leave standing water in the appliance.
If any other service needs to be performed, contact Customer Service using the
9.
contact information on the back of this manual.
Storage
Place the cooled, dry appliance in a clean, dry place.
Do not stack objects on top of the appliance.
16
AF-E8001-L_US_30130_E_IB_A.indd 16 AF-E8001-L_US_30130_E_IB_A.indd 16 9/28/23 3:58 PM 9/28/23 3:58 PM